The

Best

Add Zone For You

SITE123 - Website Builder

User blogs

Tag search results for: "mcafee.com/activate"
karenminton

McAfee antivirus is a system-protection software designed exclusively to prevent any virus or malware from infecting your system. McAfee is known worldwide to provide the best-possible protection against cyber threats and online thievery.McAfee FeaturesFull-System Scans: McAfee can scan your entire system to ensure there is no malware residing within it.Customized Scan: McAfee products let you perform custom scans of specific folders.Real-Time Protection: No malicious threat can infect your system as McAfee instantly scans any peripherals attached to the system.Web-Protection: Browse the internet with no tension about getting viruses with McAfee’s web-browsing protection.How to Download McAfee SetupFollow the below-mentioned steps to download McAfee product:

  1. Open your system and launch a web browser you prefer.
  2. Your retail package will contain a URL on its back, for example, mcafee.com/activate. Visit this website.
  3. Select your correct country and preferred language.
  4. Even though the registration page attempts at locating your correct region, it may not always be correct. So, it is recommended that you ensure that it is correct indeed before going ahead in the process.
  5. Enter:

Your McAfee product activation key.Your email address.

  1. Press the Submit
  2. Ensure that you have provided the correct email address. If not, then follow the mentioned steps.
  3. Press the Edit icon and return to the prior web page.
  4. Now provide the correct email address.
  5. Click the Verify
  6. Your subscription is now successfully activated.
  7. Create a new McAfee account and install the setup as well by following the steps mentioned on the screen.

Source :- mcafee.com/activate

marierobert

Whenever you access the internet on your device, it acquires single or multiple addresses on the network, every time it obtains an IPv4 address and an IPv6 address. IPv6 is a network which is used for a much vast larger connected device. Therefore, the issues occur in managing them are quite often so here are the ways to Fix an IPv6 no network access error:

  1. You can try the basic step of every troubleshooting process, reboot your device. When a device is restarted, its network connections also restart due to which sometimes the device automatically join again with the earlier connected networks.
  2. Most of the time, the update include fixes for network connectivity issue. So you should definitely try updating your operating system. Go in the settings and check for the Windows update and if there is any newer version available, then update your Windows.
  3. The network device driver in your PC is there just to fix the network problem, so you should definitely try for checking the Updates for Network Device Drive.
  4. There is a troubleshooter available on Windows just for fixing internet connections, go to Settings then select Update & Security then Troubleshoot. You should start running this Troubleshooter to fix this problem.
  5. Reset all the settings regarding network connections; this will help you in finding a specific issue.
  6. Reset your IPv6 settings, to further proceed type cmd on the search box of your PC, after this; the Command Prompt app will be open.
  7. Select “Run as Administrator”, after that all the IPv6 Settings will be reset.
  8. If you are using a cellular device, reset your mobile network settings. This will fix all the settings back to the normal or default.
  9. If you find any virtual private network connections on your device.
  10. Disable it now because the VPN connections disable the IPv6 connections for securing the network so might be there is any VPN connection ON on your device which had disabled your device’s IPv6 connection.
  11. Sometimes the firewall issues disabled the iPV6 networks, so try to fix this issue by Disabling your firewall or reset its settings.
  12. Press the Windows key+ R, then type services.msc in the appeared box.
  13. Select OK. This will open multiple system services options.
  14. Now, hover downwards and find IP Helper.
  15. Right-click the name of the service and choose Properties. Locate “Disabled your IP Helper Service”, which manages iPv6 connectivity.
  16. Now, select Disabled then OK.
  17. Restart your PC.
  18. Restarting your router and modem can also fix this issue. If you are at home and try to connect to your home network.
  19. Maybe the modem or router is creating the problem, so reset your router and modem and turn off your device modem and router. Then turn on it.
  20. Choose your router as an administrator. To do so, go to Controls and then turn the settings to Auto Detect.
  21. Restart your device then IPV6 connection will be active in a bit.
  22. Set the IPv6 tunnel settings, to do so choose the “6to4 tunnel “option on your router’s settings.
  23. All these fixes will fix your problem, and if they did not then contact the manufacturer of your device.

Source url:- https://mcafeecomactivate.uk.com/how-to-troubleshoot-ipv6-no-network-access-errors/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate

marierobert

Sometimes the files in our PC Windows fail the compatibility check and the issue is known as the Kernel Security Check Failure. There are many reasons behind this issue and this blog will cover the majority of them. Read through to understand how this issue takes place in your PC and how to fix it:

Error Messages

  • Stop Code error.
  • Your PC ran into a problem and needed to restart. We are looking for error info then we will restart it for you.

Reasons for Kernel Security Check Failure Errors

These are the main reasons causing the Kernel Security Check Failure error on Windows,

  • When you Start-up your PC.
  • When you Shut-down your PC.
  • When you put your PC in Sleep mode
  • When you Upgrade your PC Ram.
  • When you update your Windows.
  • If your Windows driver is Outdated.
  • If your PC Ram or hard disk gets corrupted.

Fixing Kernel Security Check failure Errors on Windows

The most simple solution is uninstalling an update or driver. It works some times; however, if it does not, then below we have shared the ways to fix the problem.

  1. If any output device on your computer is not connected accurately to your PC then the problem of Kernel Security Check failure can occur. Remove all the output devices including CDs or any flash drives. Now Restart your PC and check if the issue resolves. You can also check the Power cord and monitor connections.
  2. Malware can also be the trouble creator in this scenario, so scanning the malware can also solve this issue. Proceed to the scanning part by using reliable antivirus software. Remove any Malware that appears and restart the device. Now see if the issue is resolved or not.
  3. Try to start the Windows in the Safe Mode; this will show you the recently installed apps that may be creating these issues. Uninstall these apps and Restart your PC to check if the issue is fixed or not.
  4. You need to update the drivers of your Windows because these are the main reasons for this issue. Go to Device Manager and look for new driver updates and update the available ones.
  5. The reason for the issue can also be the Windows update, so Check for Windows update. If any update is available, then update the Windows immediately. After that, restart your PC and check if the issue has been fixed or not.
  6. You need to Scan the RAM issues, use Windows Memory Diagnostic(WMD) to perform the Scan. After this, restart your PC and check if the issue has been fixed or not.
  7. You need to scan the system to find corrupt files; you can perform this task by using System File Checker. After this, restart your PC and check whether the issue has been fixed or not.
  8. You need to Restore the system; you can perform this task by using Windows System Restore. This will do an undo setup on your PC, and this will definitely fix the issue.
  9. If a blue screen of death appears on your PC whenever you open it, then go to Advanced Startup Options and choose” Startup Repair Tool.” It will fix all the issues regarding the booting of PC.

Source url:- https://wwwmcafeeactivate.uk.com/how-to-fix-kernel-security-check-failure-errors-on-windows-10/

Ava Williams is a creative person who has been writing blogs and articles about security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

Alex IT Expert

Windows 10 is one of the most optimized operating systems Microsoft has to offer. Even though the OS works efficiently, it does face some issues from time to time. Such an issue is Kernel-Power Event ID 41. The issue can be triggered in several situations, but the most prominent one is during the system booting. In case you are facing the issue, then you have to read through the article for an effective fix. So, here are the steps to fix kernel power 41 error on Windows 10.

How to Fix Kernel-Power 41 Error on Windows 10?- Mcafee.com/activate

Update Audio Drivers and Remove Kernel-Power Event ID 41 Error

  • First of all, you have to the Windows key and right-click on it.
  • After that, click on the Device Manager.
  • You should enlarge the video, game controllers and sound.
  • Then select the Action button and choose the ‘Update Driver Software’ option.
  • You have to choose ‘Browse my computer for driver software.’
  • Now choose ‘High Definition Audio Device driver.’
  • You should click on the Next.
  • Later, click on, Yes.
  • Reboot the PC to finish up the process.

Turn Off Duplicate Device Drivers

If you want to turn off duplicate device drivers, then pursue the instructions given below.

  • Get started by going to the Windows key and right-click on it.
  • You should choose Device Manager.
  • Then enlarge the video, game controllers and sound section and find the duplicate entries.
  • When you a copy drive and right-click on it, choose Disable.
  • If your issue was not solved, then check every device for copy drivers and delete the duplicates.

Have a look

Change Power Settings

If you want to change power settings as an alternative to fixing the error, then you can follow the provided steps.

  • To get started, press the Win + S keys at once to launch Settings.
  • After that, you should choose Power Options.
  • Locate the new power plan.
  • You have to select the ‘Change plan settings’ option.
  • Then you should choose ‘Change advanced power settings’.
  • After that enlarge ‘Hard disk’ field and select ‘Turn off the hard disk’.
  • You should put it on Never or input 0.
  • Later, find the Sleep field and disable sleep timer.
  • Now, click on Apply a select OK to verify the changes.

Disable Fast Startup

If you want to turn off a fast startup, then pursue the instructions given below.

  • First, you have to press Win + S keys at once to launch Settings.
  • You should choose Power Options.
  • Now select ‘Choose what the power button does’.
  • After that, choose ‘Change Settings’ which are recently unavailable.
  • You have to find the ‘Shutdown settings.’
  • Untick ‘Turn on fast startup’ option.
  • Now, click on the Save modifications and restart the PC.

Uninstall Current Windows Update

If you want to uninstall current Windows update, then you can follow the provided steps.

  • First and foremost, you should click on Windows search box and enter Settings.
  • After that, you have to choose Update & Security.
  • You should choose ‘View installed updates history.’
  • Then go to the Uninstall updates.
  • Now, you have to restart the computer system.

Deactivate Auto-Restart

If you want to deactivate auto-restart, then pursue the instructions given below.

  • To begin with, go to the Advanced field.
  • After that, you should locate the option which says ‘Settings’ and then select it.
  • You have to unselect the mark that is next to the ‘Automatically restart’ box.
  • Now, you should verify the changes.

Source : https://mcafeeactivate.website/how-to-fix-kernel-power-41-error-on-windows-10/

Alex Smith is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

Alex IT Expert

Windows 10 is one of the most optimized operating systems Microsoft has to offer. Even though the OS works efficiently, it does face some issues from time to time. Such an issue is Kernel-Power Event ID 41. The issue can be triggered in several situations, but the most prominent one is during the system booting. In case you are facing the issue, then you have to read through the article for an effective fix. So, here are the steps to fix kernel power 41 error on Windows 10.

How to Fix Kernel-Power 41 Error on Windows 10?- Mcafee.com/activate

Update Audio Drivers and Remove Kernel-Power Event ID 41 Error

  • First of all, you have to the Windows key and right-click on it.
  • After that, click on the Device Manager.
  • You should enlarge the video, game controllers and sound.
  • Then select the Action button and choose the ‘Update Driver Software’ option.
  • You have to choose ‘Browse my computer for driver software.’
  • Now choose ‘High Definition Audio Device driver.’
  • You should click on the Next.
  • Later, click on, Yes.
  • Reboot the PC to finish up the process.

Turn Off Duplicate Device Drivers

If you want to turn off duplicate device drivers, then pursue the instructions given below.

  • Get started by going to the Windows key and right-click on it.
  • You should choose Device Manager.
  • Then enlarge the video, game controllers and sound section and find the duplicate entries.
  • When you a copy drive and right-click on it, choose Disable.
  • If your issue was not solved, then check every device for copy drivers and delete the duplicates.

Have a look

Change Power Settings

If you want to change power settings as an alternative to fixing the error, then you can follow the provided steps.

  • To get started, press the Win + S keys at once to launch Settings.
  • After that, you should choose Power Options.
  • Locate the new power plan.
  • You have to select the ‘Change plan settings’ option.
  • Then you should choose ‘Change advanced power settings’.
  • After that enlarge ‘Hard disk’ field and select ‘Turn off the hard disk’.
  • You should put it on Never or input 0.
  • Later, find the Sleep field and disable sleep timer.
  • Now, click on Apply a select OK to verify the changes.

Disable Fast Startup

If you want to turn off a fast startup, then pursue the instructions given below.

  • First, you have to press Win + S keys at once to launch Settings.
  • You should choose Power Options.
  • Now select ‘Choose what the power button does’.
  • After that, choose ‘Change Settings’ which are recently unavailable.
  • You have to find the ‘Shutdown settings.’
  • Untick ‘Turn on fast startup’ option.
  • Now, click on the Save modifications and restart the PC.

Uninstall Current Windows Update

If you want to uninstall current Windows update, then you can follow the provided steps.

  • First and foremost, you should click on Windows search box and enter Settings.
  • After that, you have to choose Update & Security.
  • You should choose ‘View installed updates history.’
  • Then go to the Uninstall updates.
  • Now, you have to restart the computer system.

Deactivate Auto-Restart

If you want to deactivate auto-restart, then pursue the instructions given below.

  • To begin with, go to the Advanced field.
  • After that, you should locate the option which says ‘Settings’ and then select it.
  • You have to unselect the mark that is next to the ‘Automatically restart’ box.
  • Now, you should verify the changes.

Source : https://mcafeeactivate.website/how-to-fix-kernel-power-41-error-on-windows-10/

Alex Smith is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

Devin Smith

Laptops are one of the most portable and preferred devices, whether you wish to do office work or any other professional tasks. After using a laptop for a long time, there may be various issues arising in it. One of the most common problems is the battery drain. Users report their laptop’s battery draining quickly and this seems to be the trend all over the globe. The issue is not limited to minor brands as well-known brands like HP and Dell suffer from this as well. So, here are the steps to fix laptop battery draining issues.

Issues and Their Possible Reasons

Follow these points to know what are the issues of battery draining that user’s face and their possible reasons:

  • Drains to 0% under power off mode: It mainly arises due to some connected standby feature. If you wish to deactivate this function fully, then you have to modify some of the registry settings.
  • Self -discharging of Laptop battery: This problem arises because of shutting it down improperly. In case you wish to troubleshoot this issue, you have to shut your system properly by using the Power button.
  • HP battery draining fast under off mode: You have to perform several actions to fix these draining issues because this problem is seen in various brands and versions.
  • Surface Pro 4 battery draining fast under shut off mode: This problem could be seen in various Surface Model. In case, you want to troubleshoot this issue, check if the firmware is up to date or not.

Battery Draining in Shut Down Mode 

Follow these steps to troubleshoot the battery draining issues:

Deactivating Connected Standby Feature

Follow these steps to deactivate the Standby feature and prevent your battery from draining too quickly:

  1. First of all, press the Win + R keys simultaneously.
  2. After a while, a run dialogue box will open. Then type the following keyword “Regedit” in the text bar of the Run dialogue box. 
  3. After that, tap the enter key to proceed further.
  4. Wait for a little, and you will see that a “Registry Editor” window will open.
  5. Then navigate to the “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power” on the left-hand side pane.
  6. Then look for the “enabled” DWORD present at the right side pane.
  7. Then, double click it.
  8. Now, you have to set “0” as your Value Data, then hit the “OK” tab to save the modifications that you have made.
  9. Finally, perform a normal restart to your laptop; it might solve your system. Then check whether the problem is fixed or not.

Note that by disabling this feature, the “Sleep mode” feature will deactivate completely, but in this way, you will fix this battery draining issue.

Battery Drains Fast in Just a Few Hours

In case your laptop’s battery drains too fast as you have observed that it gets drained in just a few hours, you have to continue with a few of the steps. This issue could be fixed by using the power button.

To fix this issue, follow these mentioned steps:

  1. First of all, press and then hold down the power button at least fifteen seconds till your laptop shuts down completely. 
  2. This process will perform deep shut down operation to your system hard disk and lets your system to force shut down.
  3. It is only a workaround, and you will have to perform these steps every time you shuts down your system. 

Shutting Down the Laptop by Using Command Prompt

If you wish to shut down your system completely, then follow the following instructions:

  1. First of all, launch the Command prompt window. You may also use the “PowerShell”.
  2. Then type the following command to shut your system down: “shutdown/s” and press enter key,

You may also use the Run Dialog Box to launch the Command Prompt.

In case you found these methods helpful, then you may create a shortcut on your desktop for this command. To do this, follow these steps:

  • First of all, right-click anywhere on your desktop.
  • Then select the option “New” and after that, tap the “shortcut” option. It will pops-out as menu options.
  • After that, type the following keywords “shutdown/ s” into the particular provided field.
  • Then, hit the “Next” tab there.
  • Next, you have to tap the shortcut icon to provide a name.
  • Finally, continue with the online instructions there follows on your screen.
  • Now, try to shut down your laptop using this shortcut. 

Here, you have to note down that it’s also a Workaround and it needs to use it each time you wish to shut down your system.

Fixing Draining Issue through BIOS Up-gradation

In case you still have the battery draining issues, then try the BIOS update method. A number of users fix their battery draining issues through this feature.

It’s an advanced process of updating your BIOS, but sometimes it gets risky. That is why it is advised to secure your important files and disks while updating your BIOS.

Fixing Battery Draining Issue by Deactivating Fast Startup Method

The “Fast Startup” feature is another way of troubleshooting the issue and it combines the function of both hibernation and shutdown. This enables your PC or Laptop to boot faster and quickly process your commands. 

To deactivate the “Fast Startup” feature, follow these steps:

  1. First of all, press Win + S keys simultaneously.
  2. Then enter the “power” tab.
  3. After that, select the “Power and sleep settings” option available in the provided search results.
  4. Navigate to the right side pane and go to the “Related Settings” section there.
  5. Then hit the “Additional Power settings” option.
  6. Next, a window related to “Power options” will launch on your screen. 
  7. After that, go to the left pane and hit the option which says “Choose what the power button does.”
  8. Tap on the option saying that the modification settings are not available currently.
  9. After that, deactivating the option “Turn on fast startup”. 
  10. Finally, hit the “Save changes” tab there.

Source:-https://devinsmith007.wordpress.com/2019/11/14/how-to-fix-battery-drain-after-laptop-shutdown/

Devin Smith is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites. 

Alex IT Expert

Windows 10 is an efficient OS; however, there are times when you can face issues like a frozen or stuck screen. The issue is an annoying one and if you are facing the same problems, then you are on the right spot. To know about how to fix stuck, slow or frozen login screen problems, follow the given directions to fix such problems.

How to Fix Slow, Stuck, Frozen Login Screen Problems on Windows 10 - Mcafee.com/Activate

Boot in Safe Mode

The computer will start with limited files and drivers in Safe mode. In case you intend to start your computer in Safe Mode, then go through the below-mentioned steps:

  1. Tap on the Start button.
  2. Click on Settings.
  3. Choose Update and Security.
  4. Choose Recovery.
  5. Select Advanced startup.
  6. Tap Restart now.
  7. Choose Troubleshoot from the Choose an Options section.
  8. Then select Advanced options.
  9. Click Startup Settings.
  10. Then choose Restart.
  11. The options will become visible, as computer restarts.
  12. Select 4 or F4 to start your computer in Safe Mode.

Quickly restart the computer in Safe Mode

If the user wants to restart the computer in Safe Mode, then abide by the given steps.

  1. Go to Choose an options section.
  2. Click on Troubleshoot.
  3. Choose Advanced options.
  4. Select the Startup Settings.
  5. Click on Restart.
  6. As your computer restarts, a list of options will appear.
  7. Select 4 or F4 to start your computer in Safe Mode.

Perform a Clean Boot

How to Perform a Clean Boot

Performing a clean boot reduces conflict related to software that can cause problems. These issues can be caused by services and applications running in the background when you start Windows.

How to perform a clean boot

  1. Find the search box.
  2. Input msconfig.
  3. Choose System Configuration.
  4. Go to Services tab.
  5. Choose Hide all Microsoft services box.
  6. Select Disable all.
  7. Then go to the Startup tab.
  8. Select Open Task Manager.
  9. Close Task Manager.
  10. Then tap, OK.
  11. Reboot your computer.

Temporarily Turn off Antivirus Firewalls

Most of the time, having multiple antiviruses, firewall or anti-malware programs may sometimes prevent the user from performing a specific task on the computer.

If this is the cause of the issue, then temporarily turn them off while still in Safe mode and try again to log in.

Have a Look

How to manually reset Windows Updates components

If you wish to manually reset Windows Updates components, then pursue the given instructions:

  1. Right-click on Start.
  2. Choose Command Prompt.
  3. Tap on Yes when asked for permissions.
  4. Stop BITS, Cryptographic, MSI Installer and Windows Update Services by typing commands:
  5. net stop wuauserv
  6. net stop cryptSvc
  7. net stop bits
  8. net stop msiserver
  9. Click Enter after every command.
  10. Rename the Software Distribution and Catroot2 folder by typing the commands and click Enter after each command:
  11. Ren C:\ \software\Distribution\Windows

SoftwareDistribution.old

  • Ren C:\ catroot2 Catroot2.old\Windows\System32
  • Restart BITS, Cryptographic, MSI Installer and Windows Update Services by typing the commands:
  • net stop wuauserv
  • net stop cryptSvc
  • net stop bits
  • net stop msiserver
  • Input Exit in the command prompt.

How to change registry settings

In case you intend to modify registry settings, go through the below-mentioned steps:

  1. Right-click on Start.
  2. Choose Run.
  3. Input regedit.
  4. Click Enter.
  5. Go to HKEY_CURRENT_USER\SOFTWARE\Policies\Microsoft\Windows\Current Version\Push Notifications.
  6. Then you will see NoToastApplicationNotification.
  7. Double-tap on it.
  8. Change its value from 1 to 0.
  9. Tap OK.
  10. Sign out and sign in again.

How to Check Event Viewer

If you want to check the Event Viewer, then abide by the given steps:

  1. Right-click on Start.
  2. Choose the Event Viewer.
  3. Expand Windows Logs.
  4. Select the Application Log.
  5. Highlights the event in the log and scroll down.
  6. The user may see logs with yellow warnings or red errors. If you see a red error, double click on it and copy the content to a document.

How to Run System Maintenance troubleshooter

Follow the provided steps to Run System Maintenance troubleshooter:

  1. Tap Start.
  2. Go to search field box and type Troubleshooting.
  3. Tap on Troubleshooting.
  4. Tap on System and Security.
  5. Select System Maintenance.
  6. Tap Next
  7. Steps to run the system maintenance troubleshooter.

How to perform Automatic Repair

If you want to perform Automatic Repair, then you can follow the provided steps:

  1. Place in the Windows installation disk or USB drive.
  2. Then restart the computer.
  3. The user will see the message request reads select any key to boot from DVD.
  4. Select any key to boot.
  5. When the Install Windows page appears, choose to Repair your computer to start the Windows Recovery Environment.
  6. In WinRE, go to Choose an options section.
  7. Select Troubleshoot.
  8. Select Advanced Options.
  9. Select Automatic Repair.

How to Run Microsoft Safety Scanner

Go through the given instructions to Run Microsoft Safety Scanner:

  1. Download the tool.
  2. Open and select the type of scan you desire to run.
  3. Start the scan.
  4. Review scan results on the screen.
  5. How to Run a System File Checker
  6. Tap Start.
  7. Go to Search field box and type CMD.
  8. Choose Command Prompt.
  9. Click on the right and choose Run as Administrator.
  10. Type sfc/scannow.
  11. Then tap Enter.
  12. Restart the computer.

 How to run the DISM tool

If the user wants to run the DISM tool, then pursue the given instructions:

  1. Tap Start.
  2. In search field box, type CMD.
  3. Select Command Prompt in the search results list.
  4. Input Dism /Online /Cleanup-Image /RestoreHealth.

How to perform a System Restore

If you want to achieve a System Restore, then you can follow the provided steps:

  1. Right-click on Start.
  2. Choose Control Panel.
  3. Select System and Security.
  4. Tap on System.
  5. Select System Restore.
  6. Tap on Choose a different restore point.
  7. Select Next.
  8. Choose a restore point created before you face any problem.
  9. Tap Next.
  10. Tap Finish.

How to Run disk clean up

In case you need to run a disk clean up, then you need to follow the offered steps:

  1. Tap Start.
  2. Type disk cleanup in the search field box.
  3. Choose Disk Cleanup.
  4. The disk cleanup drive selection box will appear.
  5. Select OK to set off the disk space calculation process.
  6. Go to Properties
  7. Select Tools and then Error checking.
  8. Check the box and tap Run.

How to Exit Safe Mode

Go through the given steps to Exit Safe mode after fixing the login screen Windows 10:

  1. Click right to Start.
  2. Choose Run.
  3. Input msconfig.
  4. A pop up will open.
  5. Go to the Boot tab.
  6. Uncheck or Deselect Safe Boot option box.
  7. Restart your computer.

Source : http://macfee-activate.com/how-to-fix-slow-stuck-frozen-login-screen-problems-on-windows-10/

Alex Smith is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

marierobert

In case you ever wanted to have your football team to manage and lead, then you are in luck as you can avail Football Manager 2020. The popular gaming franchise has returned with its 2020 version and we could not be more excited. The predecessors of the game have been amazing; however, the game has gotten better. To everyone’s surprise, the go-get market on the Game now has several new products including kits, badges and facepacks. You must have seen some people on the Game using attractive badges, facepacks and kits; you must be wondering how they got it. Here are the ways to download and install new badges, facepacks and kits to your Game.

Downloading and Installing new Kits on Football Manager 2020

Every maniac of this Game is facing the same problem of incorrect kits available in the get-go markets, So here are the steps download the  Football manager 2020 kits. Before all this, you need to download the game. Follow the steps below :

  1. Open the downloaded ZIP.
  2. Use WinRar or 7-zip and start extracting the files.
  3. On Mac extract them to /Library/ApplicationSupports/Sports Interactive/Football Manager 2020/ graphics.
  4. If you are using Windows,  then extract them to /Documents/Sports Interactive/Football Manager 2020 /graphics/Kits.
  5. Open Football Manager 2020 and choose Preferences.
  6. Then select the interface section.
  7. Make sure that you have cleared the cache and check the “Reload skin when confirming changes in preferences” tab.
  8. After this, restart the Game and save the new file.
  9. The kits have been added to your game.

Downloading and Installing Best Badges in Football Manager 2020

Here is how you can get the real crests and badges in football Manager 2020:

  1. First, you need to download a zipped file from the game. You can download it from anywhere you find suitable.
  2. Extract the files by using 7-zip or WinRar.
  3. On Mac, extract the files to /Library/Application Support/Sports Interactive/Football Manager 2020/graphics.
  4. If you are using windows, then extract the files to \Documents\Sports Interactive\Football Manager 2020\graphics\logos.
  5. Open Football Manager 2020 and then select preferences.
  6. Now, select Interface and make sure that you have cleared the cache.
  7. Enable the \Documents\Sports Interactive\Football Manager 2020\graphics\logos option.
  8. Tap on Confirm.
  9. Now, restart the game and start selecting your favorite badges and crests.

Downloading and Installing Best Facepacks in Football Manager 2020

This method will install the best facepacks in your game, simply follow the steps mentioned below:

  1. First, you need to download and install a zip file from any site you prefer.
  2. Open the downloaded section and start extracting the files with 7-Zip or Winrar.
  3. On your Windows PC, Find the folder of \Documents\Sports Interactive\Football Manager 2020\graphics\faces\ and paste the following files on this folder.
  4. On Mac, extract them to /Library/Application Support/Sports Interactive/Football Manager 2020/graphics/ folder.
  5. Open, preferences then tap on Interface.
  6. Tap on clear cache and make sure you have enabled “Reload skin when confirming changes in Preferences” option.
  7. Choose reload skin.
  8. Restart your game and enjoy using these facepacks.

Source url:- https://mcafee.today/football-manager-2020-how-to-download-and-install-kits-badges-and-facepacks/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate.

Devin Smith

Every time you download any file from your web browser it gets saved on your device. In case you want to delete them, then you can do so by learning the steps here.

How to Delete downloads in Windows

  1. Tap on a new File Explorer window.
  2. Choose the Downloads folder set up in the left menu below This PC or Quick access both. If the user cannot find that option, then they can navigate to C:\Users\*username*\Downloads
  3. A record of downloaded files and folders will appear.
  4. Choose options you wish to delete.
  5. A context menu will be displayed.
  6. Tap on Delete.
  7. Then the warning appears asking that are you sure you want to shift these files to the Recycle Bin.
  8. Tap on Yes to continue.
  9. The files will move to the Recycle Bin while still remaining on the hard drive. As a result, you have not cleared any storage until you clear your Recycle Bin.

How to Delete Downloads in macOS                                                                                                                

  1. Go to the Finder app by the use of the smiley face found in the lower-left corner.
  2. Then New Finder window will become visible.
  3. Tap on Downloads, situated in the left menu below the Favourites heading.
  4. All the files that are downloaded in the evade position will be visible in the folder.
  5. Choose files you want to delete.
  6. Manually draw them to the Trash situated in the lower right-hand corner
  7. Select File
  8. Then shift to Trash from the Finder menu.
  9. The user can also use the shortcut to shift these files to the junk: COMMAND+DELETE.
  10. Downloads will move to the Trash but they are still there on your hard. drive
  11. Tap Finder from the menu and tap on Empty Trash when the drop-down menu option appears.
  12. The user can also use the shortcut to fast delete all files from the Bin: COMMAND+SHIFT+DELETE.
  13. Then the warning appears asking are you sure you want to permanently delete items from junk.
  14. Choose Empty Trash to continue.

How to delete downloads in Android

  1. Go to Chrome browser.
  2. Click on the menu button situated on the top right corner presented by three upright-aligned dots.
  3. As drop-down menu appears, choose Downloads.
  4. A list of previously downloaded files will appear.
  5. Choose the menu button situated on the right of the file that the user wants to delete also signify by three vertically-aligned dots.
  6. As the menu option becomes visible, click on Delete.
  7. Repeat the same process to delete any files you want.

How to delete downloads in iOS

Just like the other operating systems, iOS does not offer a particular place where downloaded files will be launched or removed. Different ways are available to delete space in your iPad, iPhone or iPod touch by deleting videos, photos, audio files and documents.

Delete photos

  1. Go to the photos app.
  2. Click on Select.
  3. Click on all the photos the user wants to remove.
  4. They must all have a blue and white checkmark.
  5. Then choose the junk icon in the lower right corner.
  6. Select Delete photo from the popup menu.

Source:-https://devinsmith007.wordpress.com/2019/11/13/how-to-delete-downloads-on-any-platform/

Devin Smith is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites. 

marierobert

Trimming and then applying the sound effect into your audio clip by adjusting it seems complicated. But it’s very easy and accessible via iMovie because it provides the function to edit, trim and adjust audio clips. Follow these steps to know how music can be edited, cut, and adjusted in iMovie.

Edit the audio clip in iMovie over Mac 

For this action, first of all, you have to go to the playhead of the timeline of your movie. Then you can edit and sort down the clip to the portion you want to trim. Follow these steps to do this:

  1. Hit the “Modify” button. Then go to the “Trim to Playhead” option under the menu icon.
  2. Go to the audio clip and then right-click on it. Now choose “Trim to Playhead” under the shortcut tab.

Using Clip Cutter/Trimmer

In order to trim a specific portion/segment of a video or a movie, follow these points:

  1. First of all, navigate to the audio clip.
  2. Then tap the right-click button from your mouse. Now choose “show Clip Trimmer” from the shortcut menu icon.
  3. Once the clipping editor/trimmer appears, click the segment to select what you want to trim by dragging down the arrow tabs. After this action, the segment that you have chosen to trim will be removed.
  4. In case you see that the arrow sign is changing into the film strip symbol, then you can move the whole clip, but the trimmed area will remain unaffected.
  5. Now tap on the close clip trimmer option once you complete the process.

Adjusting the playing motion of a sound clip

  1. Navigate to the Viewer and then hit the “Speed” tab on it. Under the speed pull-drop box, choose the “Custom” option.
  2. Then type the speed percentage following it. In case you like to set a different speed, you may also choose from the list.
  3. Then tap right-click on the clip and from the shortcut option, select the “Show Speed Editor” tab.
  4. Now a slider will appear on the upper portion of your video or movie clip from where you may adjust the frequency of the speed of your desired audio file.

Adjusting the audio volume of a clip

  1. First of all, select your desired audio clip.
  2. Locate the Viewer and tap the “Volume” button.
  3. Then drag the slide panel to the desired sound volume. In case you wish to block the sound volume, mute it by hitting the “mute” tab.
  4. Now tap the clip and look for the two-sided pointed arrow. When it appears on your clip, adjust the volume by dragging up and down.

Trim down the audio clip

To apply this function, first of all, you have to select your video timeline then follow these instructions:

  1. Hit the volume button located at the lower portion of your window.
  2. Now hit the “Trim” option.
  3. Now hold any of the corners of your audio clip and then drag it to increase or decrease its size.

Modifying the playing motion of your audio clip

In case you wish to increase or slow up the speed of your sound clip, try the following:

  1. Hit the speed tab located at the lower portion of the window.
  2. Hold the slider. Then move it towards the left or right pane of your screen according to your wish.

You will see the tortoise and hare symbol to signify the speed of your sound clip.

Fade the sound clip

If you are thinking of fading your sound clip at the beginning and at the end of the file, you can do so by these steps:

  1. Go to the volume buttons and press them. It is present on the lowermost portion of your screen.
  2. Now hit the “Fade” button.
  3. Now a triangle will show on your screen. Drag it to perform fading operation into your clip.

Source url:- https://amcafee.uk.com/how-to-edit-and-manage-audios-in-imovie-in-mac/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate.

Pages: 1 2 3 4 5 ... » »»

Sujay Bhaattacharjee The Man Behind Senstional Design

Alexa Rank 299000

google ranking checker

Website Page View Hit

Sales

Manager