The

Best

Add Zone For You

User blogs

Tag search results for: "windows 10"
Alessia Martine

Windows 10 has a lot of in-built security options, which you might not be aware of. These Windows Settings automatically save your system from any virus or damage. These settings were introduced in Windows 10, version 2004, and since then, they’ve proved to be protective.

hqdefault

These settings could be launched in three primary ways: from the Start menu, from the settings section, and the ‘System Tray’ icon. Below mentioned are the types of settings of Windows Security:

  1. Protection from Virus
  2. Scanning – There are certain hostile viruses that can enter your system and do some damage. Thus, ‘Windows Defender Offline Scan’ is capable of removing these viruses no matter how hard they’re to remove.
  3. Ransomware Protection – Controlled Folder Access, which is an absolute necessity for all Windows customers, can utilize this to ensure records, documents, and memory files from programs that look for access without consent. While it might be irritating as you will get invited more than regularly, however, it’s for your advantage. This component, alongside Ransomware information recovery associated with OneDrive, will ensure the documents can be recouped if there occurs any Ransomware strike.
  4. Other Protection Settings – These settings offer ongoing assurance, Cloud-conveyed security, the programmed test consent, Control envelope access, rejections, and notice controls. Of these, make a point to turn on Alter Insurance so no other programming can change Windows Security settings.
  5. Protection of Account

Protecting your account from any harm is very important. Thus, these settings are related to protection and give access to some controls associated with the same.

  • Protection of Network

Networks are divided into three categories – Domain Network, Public Network, and Private Network. Keeping your settings according to these three categories that can restrict the allowance and access to external connections. These settings are built for Firewall and Network Protection to ensure blocking any random access.

  • Controlling Apps and Browser

These settings ensure the protection of applications and Browser to work under authority. Its online security consists of SmartScreen, Exploit Protection, and Isolated Browsing.

  • Security of Your Device

It’s a security highlight, and if your gadgets bolster it, you will get the opportunity to get to them from here. If you see the message “Your device meets the requirement for standard hardware security,” this is on the grounds that the PC shares both of TPM 2.0, Secure boot empowered, DEP, or UEFI Mat accessible in the framework. It offers access to:

Center disconnection: Offers included security against malware and different assaults by detaching PC forms from your working framework and gadget.

Memory respectability: It keeps vindictive code from getting to high-security forms.

Secure boot: Itforestalls malware from tainting your framework during boot.

The security processor: It gives extra encryption methods.

  • Performance and Health of Your System

These Settings give you an overview of the performance and health of your device. It shares the health rate of different elements like Storage, Applications, etc.

  • Family Options

The last segment is the Family Options, yet it’s progressively about teaching the purchasers about the component, and what they can receive in return. We have discussed Parental control in detail, and on the off chance that you gave kids in the house-sharing your PC, we suggest utilizing it. You can set up screen time propensities, monitor what is being searched, and permit your children to purchase applications and games.

Windows Security on Windows presents you with a total combination that permits you to authorize the security parts of the PC.

 

Source: https://helpmcafeeuk.com/complete-guide-to-security-settings-in-windows-10/

karenminton

VPN is one of the best ways to make sure that your online privacy is maintained. But in a few cases, the VPN connection may leak your sensitive data. So, in this blog, we will tell you how to route all traffic via VPN on Windows 10? Here are the directions given below.

Through a VPN Killswitch of Client

mcafee.com/activate

Follow these steps and learn how to route your traffic through a VPN Killswitch:

  1. Firstly, invoke the VPN client on your device.
  2. Thereafter, launch its section of the configuration.
  3. You have to ensure that to set to Always or Auto.
  4. This utility ensures that each network traffic goes directly via the personal VPN tunnel. In case the connection of VPN fails, PIA blocks each traffic automatically removing the accidental leaks risk.

Change a VPN Connection Manually

If you want to change your VPN connection manually, then here are the steps you need to follow:

  1. Navigate to the screen of Network Connections.
  2. After that, find the VPN connection.
  3. Then select and right-click on it then choose the properties inside the menu.
  4. You should click on the Networking section on the screen of VPN properties.
  5. Thereafter, check the box of ‘Internet Protocol Version 4 (TCP/IPv4).’
  6. You have to choose the button of Properties.
  7. Go to the freshly launched screen, select the button of Advanced.
  8. Don’t forget to check the box of ‘Use default gateway on the remote network.’
  9. Select the OK button.
  10. Now, reboot the system.

Through OpenVPN

OpenVPN allows you to route your traffic on Windows 10. The straightforward process to do so is given below:

  1. You should find the file of ‘OpenVPN configuration’ connected with the server (OVPN).
  2. After that, launch it in a text editor.
  3. You should add the pursuing line wherever into the file of OVPN: redirect-gateway def1.
  4. Then store the file then shut it.
  5. Now, reboot the OpenVPN server.

With the help of the methods mentioned above, you will be able to successfully route the traffic on your Windows 10 device. Ensure that the network traffic is completely routed via VPN.

Source :- https://kellieminton123.wixsite.com/mysite/post/how-to-route-all-traffic-via-vpn-on-windows-10

karenminton Jun 4 '20 · Tags: windows 10
Devin Smith

Dropbox is an excellent service but it can also cause many issues to users of Windows 10 operating system. Although there may be few solutions when the service gets annoying. There is one most annoying issue as your desktop client syncing stops. If you are facing it as well, then we will help you fix it:

How to Fix Dropbox not syncing on Windows 10

In this article, we have mentioned eight troubleshoot to fox the issue of Dropbox not syncing on Windows 10 operating system in easy and convenient methods:

  • Turn off Antivirus
  • Unlink Dropbox
  • Checking you are connected with Internet
  • Deleting cache of Dropbox
  • Installing Dropbox from Microsoft Windows store
  • Checking firewall and attach Dropbox in the exception list
  • Run Application Troubleshooter
  • Uninstall latest updates

1) Turn off Antivirus

An Antivirus program in your operating system can be harmful to another aspect of your operating system. It is known for conflicting with several Windows 10 features and third party program included Dropbox as well.

You need to stop your Antivirus program for some time and then check whether your Dropbox can sync or not. If you see the sync work correctly without having any issue when you turned off Antivirus, then you need to uninstall the Antivirus program and use Windows Defender.

2) Unlink Dropbox

Here are the steps on how to link and unlink your account:

  1. Launch the Dropbox.com and the sing in with your account.
  2. Tap on your name that appears on top of your screen or in the open pages menu of your account.
  3. Tap settings.
  4. Choose the Security button.
  5. In the device option, tap on the “X” that appears the name of your device to unlike.

After the above process, you need to check the issue is resolved. If not, then you can try another troubleshoot that is given below.

3) Checking you are connected with Internet

Obviously, this feature is performed with the help of the Internet, so you need to ensure that you are connected with the internet. Here you need to check that your internet properly works and your device is properly connected with your device. If you notice any issue with the Internet, then you need to fix it, or you can also inform your network provider.

4) Deleting cache of Dropbox

Here are the steps on how to Deleting cache of Dropbox:

  1. Launch the file Explorer.
  2. Visit the Dropbox folder and then go to a cache file folder. Alternatively, you can also use the command prompt search field.
  3. In the search field, you need to type “%HOMEPATH%Dropbox.dropbox.cache” and hit Enter.
  4. Choose all by tapping Ctrl + A.
  5. Here to needs to tap Delete and then hit confirm, to remove entire things from the folder.

Now you need to check the issue is resolved; if not, then you can try another troubleshoot that is given below.

5) Installing Dropbox from Microsoft Windows store

You are probably using the regular version Windows 32 version of your Dropbox, but there is also a UWP version. It is an excellent feature. Additionally, the UWP application works better in Windows 10, so you have nothing to lose.

6)   Checking firewall and attach Dropbox in the exception list

Here are the steps on how to Checking firewall and attach Dropbox in the exception list:

  1. Visit search, type firewall, and then launch “Windows defender Firewall.”
  2. Visit to allow an application via the Windows Defender Firewall.
  3. Scroll down on the application list and locate Dropbox.
  4. Here you need to sure that “Private” and “Public.”
  5. Now you need to change your save and then restart your PC.

7) Run Application Troubleshooter

Here are the steps on how to Run Application Troubleshooter:

  1. Visit Settings.
  2. Move to “Updates and security.”
  3. Tap Troubleshooter.
  4. Tap the Windows Store application and select Run the Troubleshooter.
  5. Here you need to wait for the troubleshooter to complete the process.
  6. Now restart your computer.

8) Uninstall latest updates

Some time updates version also reason behind this issue, so you can uninstall the updates to fix this issue

  1. Here are the steps on how to uninstall the latest updates:
  2. Visit settings.
  3. Tap Updates and security.
  4. Hit Windows Updates
  5. Visit Update History and then tap on Uninstall updates.
  6. Here you need to find the latest updates of your PC, and then right-tap it to uninstall.
  7. Now you need to restart your PC.

Source:-https://devinsmith007.wordpress.com/2020/05/07/how-to-fix-dropbox-not-syncing-on-windows-10/

Devin Smith May 7 '20 · Tags: windows 10, dropbox
Devin Smith

If you are Windows 10 user, then there are times when you mistakenly delete an exe file. The mistake can severely cost you in case the file was wscadminiui.exe. If you deleted the same, then read through the blo0g to fix the error quickly.

Run a Full Scan
  • Go to the Taskbar Search on your system.
  • After that, input ‘Windows Security’ into it and hit the Enter key.
  • You should click on the option of Virus and threat protection.
  • Then select the Scan Options and continue to the next screen.
  • After showing the next screen, click on the Full scan radio button and choose the Scan now button.

Perform SFC for Damaged System Files

  • Go to the Windows Search on your system.
  • After that, input ‘cmd’ into it and hit the Enter key.
  • Once Command Prompt shows, right-click on it, then click on the ‘Run as Administrator.’
  • After prompting the User Account Control, select the Yes button to provide permission.
  • Once the cursor blink, input ‘sfc /scannow’ into it and press the Enter button.
  • Now, the PC will begin checking each file with the performing of the command and fix itself after founding any.

Run DISM Command

  • Hold the Win + R keys at the same time on your system to launch the Run section.
  • After that, input ‘cmd.exe’ into it and hit the Enter key.
  • Press the ‘Control + Shift + Esc’ keys at the same time on your system to launch the Command Prompt as admin.
  • You have to wait for User Account Control to bring up then select the Yes button.
  • After showing the Command Prompt, input the pursuing command and press the Enter button: DISM.exe /Online /Cleanup-image /Restorehealth.

Uninstall Unwanted Programs

  • Press the Win + I keys on your system for launching the Settings app.
  • After that, click on the Apps option.
  • Click on the option of Apps and Features from the left-hand side panel.
  • You should find the suspicious entries.
  • Select such an app and click on the Uninstall option.
  • Go to the Uninstall option again once you ask and click on the Yes button after prompting you for deleting the software.
  • Now, pursue the steps whether you appeared to finish the uninstallation process in sort to solve this error.

Install All Updates

  • Hold the Win + I keys on your PC to launch Settings.
  • Click on the Update and Security option.
  • Then select the Windows Update button.
  • Finally, select the option of ‘check for updates’ in the right-hand side panel.

Source:-https://devinsmith007.wordpress.com/2020/05/06/how-to-fix-wscadminui-exe-on-windows-10/

Devin Smith May 6 '20 · Tags: windows 10
karenminton

Skype is a hub of video and voice calling lovers that are the giant in the world of messaging. Skype provides enhanced quality video calling features to its users. It can be operated on any of the available devices, be it a smartwatch, tablet, iOS smartphone, Windows, or android. Some users reported various problems while communicating on Skype app.  Unlike other applications, it also gives users the ability to make video conferencing calls on various platforms. 

Reasons for Audio Not Working Issues on Skype

There are various reasons for arising this error code while connecting to other users on Skype.

 There are various reasons for arising this error issue, and the possible reason is due to the headphone mic problem or internal system error.

  • Audio is not adjusted properly: Skype has the built-in audio manager tool that adjusts the voice levels, but if it fails to perform smoothly, then turn Off the feature and activate it again.
  • Breaking Audio Calls while Calling: It might due to some applications running in your device background. Additionally, try switching to another network and check that the issue is resolved.
  • Skype Audio Output Not Performing Properly: If the issue persists, you will be required to check that your playback setups. Then, ensure that your headphones and speakers are adjusted to an audio device as default.
  • Distorted Skype Audio: This issue occurs just because of network connection problems. Make sure to have a stable and fast network.

Get the Speakers and Microphone Configured

  • First of all, hit the Skype app icon to launch.
  • Then, navigate to the Tools section and then hit the Options tab.
  • Go to the panel of Audio Settings.
  • Make sure that your speakers and Microphone are adjusted properly. One can check the stability and voice system of microphones and speakers both. Configure them properly to make it function well.
  • Finally, hit the Save option there.

Note: In some cases, the default audio speakers are changed to something else after performing an update. Therefore, check that the audio gadget is properly configured and administered correctly, permitting all the commands.

Applying Default Driver of Microsoft

  • First of all, hit the Window logo and X tab at one go to launch the Power User menu option.
  • Then hit the option Device Manager there. It will appear via the listing on your screen.
  • Once the Device Manager window launches, go to the Audio device section and apply right-click on it.
  • Then, select the option “Uninstall.”
  • Now, check the driver software for the device on which you are working and hit the Uninstall button there.
  • Once you have removed the particular driver, the final step is Rebooting. It will save the adjustments made by you.
  • Once the system rebooted successfully, the driver will automatically install it on your machine after fixing various glitches.

Managing Microphone Set-Ups

  • Go to the audio icon and then right-click on it. The option will be located at the Taskbar.
  • Then, select the option “Recording Devices” by navigating the menu option.
  • Search the Microphone option and apply double-tap to expand its related features and properties.
  • Now, hit the tab “Advanced” and ensure that the elusive controls option is not active.
  • Then, hit the Apply option and tap on Ok.

Upgrading Sound Drivers

One can install the recent edition of the audio driver from two different ways:

Through Motherboard and Manual set up process

Visiting Manufacturing Site of Sound Card

It is requested to the users to keep the sound card or driver up to date to avoid any sound issues on your device. Installing the latest edition of audio drivers removes multiple errors from your device.

Select the most recent and updated version of your audio card and install it on your device, but keep in mind to remove all the corrupted audio drivers and sound cards.

Various drivers especially crash while running on Skype and flashes error issues. One such issue creating driver is “Realtek,” if you are also facing issues with this driver, it is recommended to use any other driver for your device. 

There are many types of the driver available online; you can purchase the same by visiting their respective websites.

Source :- https://securenorton.com/how-to-fix-skype-audio-not-working-on-windows-10/

Daisy Martin arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving. Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at norton.com/setup.

karenminton

Cybercriminals constantly stream all over the internet, looking to prey on any system with zero to minimum security. So if you are browsing the web without any antivirus, then there is a good chance that your PC will get attacked by a virus or malware.                         

In this article, we will show you the best antivirus software that you can use in your Windows 10. Here are five best Antivirus software for Windows 10 in 2020:

  • Editor’s pick: Bitdefender
  • Reason Core Security
  • Malwarebytes Anti-Malware
  • Windows Defender Advanced Threat Protection
  • Enhanced Mitigation Experience Toolkit

1) Editor’s pick: Bitdefender

Bitdefender is currently one of the top antiviruses in the world, and this tool has basic as well as advanced features in order to secure any type of attack on your PC.

Personal data is one of the essential things of Bitdefender security policy, so you can use its tools to secure your data and prevent cybercrime.

Here is the list what you get with Bitdefender:

  • Create an exclusive list that you wish to protest from ransomware and the current signature.
  • Webcam protection: No one can access your browser when you are active Bitdefender.
  • Dedicate firewall: Sets up another firewall to make double protection and secure your program on the internet.
  • Wi-Fi network security: If a Wi-Fi network setting by cybercriminals try to access your data or harm your device, then you will be notified.
  • The vulnerability scanner is set to detect essential components that are missing from your system software.
  • Multidevice protection: It is one of the best security tools to secure multiple devices at once.

If you want to keep your device safe from a cybercriminal, then we will strongly recommend you to use Bitdefender.

2) Reason Core Security

It has multi-layer features that are a core reason to provide security as real-time protection and save the user from unwanted vires to being installed into their Computer.

Here are the complete features of the Reason Core Security:

  • Reason Core Security has a swift service to find viruses and secure your computer from unnecessary resources.
  • Always keeps safe your web browser from adware viruses and cyber-criminals.
  • It has a cloud-based scan that can always protect you from the most recent virus.

3) Malwarebytes Anti-Malware

This tool can eliminate malware programs from your computer. It also removes rootkits and repairs your device from damaged files. It also has a premium version that offers you up-gradation that makes your computer secure from cyber-crime. You can test this feature on your Computer 14 days for free; then you can buy it.

Here are the complete features of the Malwarebytes Anti-Malware:

  • Preventing your system from malicious websites.
  • Automatically detects malware in real-time.
  • Enables your given schedule automatically to scan updates.
  • Terminates malware from the system.

4) Windows Defender Advanced Threat Protection

Cyber-criminals are increasing their activities and Microsoft is enhancing Windows 10 too. Windows Defender Advanced Threat Protection helps you investigate, detect, and respond to a malware attack on your Computer.

The tool is designed with Windows 10 security features and allows the best features to your Computer from unwanted attacks and cyber-criminals. Windows Defender Advanced Threat Protection is recently available only for Windows 10 enterprises, Windows 10 Pro Windows 10 Enterprise for Education, Windows 10 Pro Education, and running on Insiders’ computers.

5) Enhanced Mitigation Experience Toolkit

The main benefit of the Enhanced Mitigation Experience Toolkit is protection from new or undiscovered threats that are detected by this Antivirus tools. If you want to use this tool, then you can download it from the Microsoft Official sites.

Source :- https://instoffice.com/blog/5-best-antivirus-software-for-windows-10-in-2020/

Daisy Martin  is a qualified IT engineer by education. After working in the IT sector for a decade, she began writing about it two years ago. She loves to write about emerging technology like office.com/setup .

Devin Smith

Windows is among the most-reputable OS globally, and Microsoft’s timely updates play a key role in it. Routine Windows updates ensure that your system stays secure and optimized too. However, there can be minor hindrances while updating your OS> One such problem is the error code 0x800703f1. If you are facing it as well, then the blog will be useful to you. So, here are the steps to fix the error.

Launch Windows Update Troubleshooter

In case the user wishes to launch Windows update troubleshooter, then they can pursue the mentioned instructions.

  • Go to the Start tab and right-click on it.
  • You should click on the Settings option.
  • Navigate to the right-hand side and move down unless you view Windows Update entry.
  • You have to select it once and choose the Run the troubleshooter.
  • Now, wait for Windows check errors and reports back.

Check for Malware via a Full System Scan 

In case the user wants to check for malware via a full system scan, then abide by the provided steps.

  • Go to the Windows search and enter Security into it.
  • After that, select the Virus and threat protection option.
  • You should click on the Scan options.
  • Now, navigate to the Full scan and choose the Scan now tab.

Uninstall Newest Windows Updates

In case the user wishes to uninstall newest Windows updates, then they can pursue the mentioned instructions.

  • Navigate to the Windows search section and input the Control Panel into it.
  • You should click on the Enter key.
  • After that, reach the Program option.
  • Then select the Uninstall a program.
  • Go to the left-hand side and click on the ‘View installed updates.’
  • You have to select the most current Windows updates.
  • Later, select it, and right-click on it then select the Uninstall option.
  • Now, restart the Windows and attempt to apply updates again.

Perform DISM and SFC Scans

In case the user wants to perform DISM and SFC scans, then abide by the provided steps.

  • Navigate to the Windows search and enter ‘cmd’ into it then hit the Enter key.
  • After that, reach the Command Prompt from the search results and right-click on it.
  • Then click on the Run as administrator.
  • You will see the freshly launched screen, enter the pursuing command then hit the Enter key: ‘sfc /scannow’.
  • You have to wait until completes the scan process and solve the system errors.

In case it’s doesn’t guide you, then you can use the DISM utility- it should run a cleanup and recovery of the OS.

  • Launch the Command Prompt with administrative privileges again.
  • Enter the pursuing command and press the Enter key: DISM /Online /Cleanup-Image /RestoreHealth.
  • Now, the scan process might perform for a while.

Reboot Windows Update Service

In case the user wishes to reboot the Windows update service, then they can pursue the mentioned instructions.

  • Hold the Win + R keys altogether on the keyboard to launch the Run dialogue box.
  • After that, enter ‘services.msc’ then press the Enter key.
  • You should move down to Windows Update tab.
  • Later, right-click on it then choose the Restart option.
  • Now, reboot the system.

Reset Windows Update Components through Command Prompt

In case the user wants to reset Windows update components through command prompt, then abide by the provided steps.

  • Enter to Command Prompt (Admin) as described in step 4.
  • Enter every command, holding Enter after every one of them: 
    • net stop wuauserv
    • net stop cryptSvc
    • net stop bits
    • net stop msiserver
    • ren C:WindowsSoftwareDistribution SoftwareDistribution.old
    • ren C:WindowsSystem32catroot2 Catroot2.old
    • net start wuauserv
    • net start cryptSvc
    • net start bits
    • net start msiserver

Check the Drivers

In case the user wishes to check the drivers, then they can pursue the mentioned instructions.

  • Go to the Start, and right-click on it then select the Device Manager.
  • You should open the Display adapters field.
  • Reach the NVIDIA driver and choose the Uninstall Device.
  • You have to choose the option ‘Delete the driver software for this device’.
  • Then click on the Uninstall option.
  • Restart the system and open the Device Manager once more.
  • Go to the upper side of the screen, ‘select the Scan for hardware changes’ option.
  • Now, you have to wait until Windows installs fresh drive drivers.

Install Windows Again

In case all things fail, you can attempt to install the Windows again. There are multiple methods you can avail of, but the offical one is always prefreable.

Source:-https://devinsmith007.wordpress.com/2020/03/13/how-to-fix-0x800703f1-update-error-code-on-windows-10/

Lucas Smith

Virtual Private Network is a private network that provides various services to its consumers to transfer and accept data in both public or shared networks. It works if its computing devices are connected directly to private networks. It helps to connect various VPN enabled applications running on multiple devices such as smartphone, desktop or a laptop. VPN helps you to enhance security, app management and functionalities related to your private network.

VPN also provides another feature to auto-connect applications with the launching of VPN on Windows 10. The automatic features enable your application to auto-sync to VPN when you launch it.

Pursue these instructions if you wish to connect an application to VPN on the startup:

 Adding VPN Auto Triggering Feature

  • First and foremost, set up your VPN connectivity on Windows 10.
  • Then, you will be required to expand the interface of PowerShell on your device. To do this, same, tap on Start tab from your system desktop.
  • Then, enter the keyword “Powershell” into the search menu.
  • After that, apply the right mouse click on the option “Windows PowerShell” and tap on “Run as Administrator” option by navigating the menu option.
  • Now, hit the “Yes” tab once the prompt appears, asking for your confirmation to access your system.
  • Then, navigate to the window of PowerShell and enter the under-mentioned keywords:

 < VPN_Connection >

< App_Path >

  • After that, replace these with your VPN connection name and file location of the app that you wish to use accordingly.

“Add- Vpn_Connection_Trigger_Application – Name “< VPN_Connection >” –ApplicationID “< App_Path >.”

Note: Ensure that you have included quotation marks in the above path.

  • Now, tap the enter key to apply your command.
  • After that, a prompt will appear related to PowerShell notifying you that split tunnelling feature is set turned Off by default. If you wish to continue, give your confirmation and activate the respective feature before initiating for the trigger.
  • Now, you have to enter “Y” character once the pop-up shows on your screen followed by the Enter key to proceed.

Note: It is directed to turn On Split Tunneling feature for making it auto-trigger for quick connection every time whenever you launch VPN service.

Split Tunneling splits all the currently existing traffic and only allows the relevant data comes from your expanded or connected app to flow via VPN. It prevents Windows from being routed to all the network traffic via VPN once the app triggers to launch.

  • Now, enter the following command into the PowerShell and then replace <VPNConnection> with the name of your VPN:

” Set-Vpn_Connection- Name ” < VPN_Connection > ” -Split_Tunneling $_True.”

  • After that, tap on the Enter key.

If you don’t need to terminate your connection and unfortunately, the app gets closed by mistake, then you may set a timeout buffer for the application to make it restart.

  • After that, enter the command “Set-Vpn_Connection -Name “< VPN_Connection >” -Idle_Disconnect_Seconds < Idle_Seconds >” into your PowerShell followed by Enter key.
  • Then, you have to replace the command “< VPN_Connection > with the connection’s name. Also, replace the command < Idle_Seconds > with second’s count and wait for a little until you see a confirmation prompt related to the termination of your connection.
  • At last, once the app shuts off, your system’s Window will wait for about 10 seconds until VPN terminates successfully.

Checking Auto-Triggering Application to VPN

If you wish to check which application you have set for triggering for a start to your VPN, you have to different options:

  1. Using PowerShell cmdlet
  2. Navigating File Explorer and Editing Phonebook

Through Cmdlet of PowerShell

  • Firstly, tap the Start button and then enter “Powershell” into the search pane followed by entering the key.
  • Now, you have to apply right click on the option Windows PowerShell and then tap the menu.
  • Next, choose the option Run as Administrator.
  • After that, hit the “Yes” button appears via a prompt dialogue box, asking your confirmation for accessing on your device.
  • Now, enter the following command followed by enter key:

“Get+ Vpn_Connection_Trigger + Connection_Name < VPN_Connection >”

  • Then, replace the keyword  < VPN_Connection > with your VPNs name and hit Enter.

Through File Explorer

  • First of all, expand File Explorer and enter the command in the address pane:

“C:\ Users\ <User>\ App_Data\ Roaming\ Microsoft\ Network\ Connections\ Pbk.”

  • Then, it would help if you replaced “< User >” with existing VPN username followed by the enter key.
  • Now, right-click the option “ras_phone.pbk,” and hit the desired text editor where you wish to launch your file.

Note: Most of the “Text Editor” holds the Find feature for those who don’t wish to scroll for searching each application.

Smith is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on webroot.com/safe and many other related topics. He is a very knowledgeable person with lots of experience.

Source:- https://helpwebroot.com/blog/how-to-make-windows-10-automatically-connect-to-a-vpn-on-startup/


karenminton

Windows 10 holds various interesting features and provides ample of dynamic qualities and updates. After every fresh update, edition change, etc., or if you need to create a fresh user account, the system flashes a sequence of messages on your device’s screen. It includes “Hi,” “This might take several minutes,” “We’ve got some updates for your device” etc. This series or notifications are called Sign in animations that occur on every system running on Windows 10.

These animations sometimes get annoying or frustrated, so users want to disable them on their system. When you deactivated the animation feature, the sign-in process will get slightly quicker than before. As per an examination, with this feature enabled, the login process takes 33.5 seconds whereas; it takes 23.5 seconds on disabled mode.

Here are the steps on how to deactivate the feature on your device with Windows 10 installed:

Using Registry Editor

It is recommended to use the Registry editor for disabling Login animations related while using Windows 10 Home, Enterprise or Professional edition. It’s a good way to disable those annoying animations via editing registry editor as it works conveniently than Group Policy Editor. Even, if you wish to use Group Policy Editor for Enterprise and Pro editions, then you can do so.

  • First of all, it is recommended to create a System Restore Point on your device for further back up if anything happens wrong. Though your system does this task automatically but creating it manually, is also a wise task.
  • Now, launch your Registry Editor tool by hitting Window + R keys to expand the Run dialogue box.
  • Next, insert the keyword “Regedit” into the provided space followed by entering.
  • Locate the under mentioned registry key by navigating to left-hand side section:

“HKEY\_LOCAL\_MACHINE_\ SOFTWARE\ Microsoft_\ Windows NT_\ Current_Version_\ Win_logon.”

  • In case, you are unable to view the particular key “Winlogon” just beneath the folder “Current_Version,” then apply right-click on it.
  • After that, hit the new tab there and after that tap on “Key.”
  • Next, provide a name to the key as “Winlogon.”
  • After that, apply right click on the folder Winlogon located at the left-hand side section and choose the “New” button.
  • Now, hit the DWORD Value (32).
  • Next, name the particular value “EnableFirstLogonAnimation.” Then, apply double click on it and set up the particular value to “0.”
  • Wait patiently for the fresh user Login process, but it doesn’t need to reboot or sign in again to save your modifications.
  • In case, you wish to see the login animations once again on your device, then go to the registry editor and set the digit value from 0 to 1. It will return to the previous process where the animation was flashing on your screen.

Downloading One-Click Registry Set-Up

If you don’t want to edit registry whenever you need to disable animation flashing function after updating or signing in your account, then install “Disable First Logon Animation Set-Up” on your device. To download the same set-up, then abide by the offered steps:

  • In the beginning, launch the “.zip” downloaded file on your device and look for the file “Disable First Logon Animation.reg” in the respective folder.
  • Once, you got that file, double click on it and confirmed all the information to add in that particular registry segment.
  • In case you wish to re-activate the particular animation on your device, then it is advised to hit the file “EnableFirstLogonAnimation.reg.”

Using Group Policy Editor Tool to Disable Animation on Enterprise and Pro Edition Windows

  • At the very start, open the “Group Policy Editor” tool by inserting “gpedit,msc” in the provided search box of Run dialogue prompt. Then hit the Enter button on your keyboard.
  • Go to the section “Computer Configuration” and then hit the “Admin Template” option there.
  • Next, hit the System tab and press the “Logon” button present on your screen.
  • Search for the set-up option “Show First Sign-in Animation” located at the right-hand side section of your page. Then apply double click on it.
  • Now, hit the deactivate related option for the ” Sign-In Animation” feature option.
  • Then, tap on the OK button to save your modifications.
  • Next, it is advised to exit from the Editor window to make your system to accept all the modifications. There is no requirement for rebooting and re-login into your account.
  • In case you wish to activate the feature once more, then double click on “Show First Sign-in Animation” and modify it to “Activated” to “Not Configured.”

Source :- https://instoffice.com/blog/how-to-deactivate-first-sign-in-animation-on-windows-10/

Kellie Minton is a qualified IT engineer by education. After working in the IT sector for a decade, she began writing about it two years ago. She loves to write about emerging technology like office.com/setup.

karenminton

Windows 10 provides various interesting features for its users. Microsoft is striving to provide all the comfort to its users by putting interesting and handy features in one go.

Now, Windows 1o allows its users to keep their favourite website just on their device’s desktop. This feature makes the user more reliable on those websites as they can easily access the features and tools of the particular website.

Adding a site to the Start menu or Taskbar makes the users unable to access with ease and quickly. This activity saves more time and frustration as most of the work is being done on web browsers. Users are able to save and pin any of their preferred web browsers. Be it Microsoft Edge, Firefox, or Google Chrome, etc.

Follow the mentioned steps for adding your most preferred web site from any browser to your Task-Pane:

Adding via Google Chrome

  • First and foremost, go to the website that you wish to pin.
  • Hit the three-dotted icon located at the uppermost right-hand side section of the Google Chrome browser.
  • Then, navigate to the “More Tools” option and hit the “Create Shortcut” tab there.
  • Next, a prompt window will appear on your screen. You may modify the name of your shortcut.
  • After that, hit the “Create” tab option. This action will generate a particular icon on your screen automatically.

Note: Google Chrome launches the web page as a usual function of Chrome. If you wish to check the option “Open as Window,” navigate to Chrome taskbar symbol when you tap on the particular shortcut.

  • Now, go to the desktop and apply right-click on it.
  • Next, hit either of the two options between “Pin to Taskbar” or “Pin to Start.” It can be used without the desktop shortcut.

 For Mac Users

Mac works slightly differently while creating a website shortcut on your Mac desktop as the functions and features are something different to that of Windows. Abide by these points to know how to create a shortcut on Mac:

  • You have to hit the “Save Page as” option instead of “Create a shortcut tool” as we do in Windows.
  • Then, save the link to your Mac desktop.
  • After a while, a shortcut will be created on your desktop screen with ease.

Creating Website Shortcut through Firefox

There is not any straightforward way in Mozilla Firefox to create a shortcut icon on your Taskbar as in Google Chrome. We have to undergo through some workarounds:

  • First of all, Locate the “Firefox” in your Windows search function.
  • Once the listing appears, hit the best- matched option and tap on the “Open File Location” option.
  • Next, hit the Firefox shortcut and drag it to your desktop. You can also apply the copy-paste function to get the shortcut on your device.
  • Then, apply right click on the option “New Shortcut” and then hit the “Properties” tab there.
  • In the field “Target,” you have to add on “Url” and type the site that you wish to pin up to your Start menu. For example: “C: Program Files_Mozilla Firefoxfirefox. exe -URL  https: // http://www.digitaltrends.com.”
  • After that, hit the OK tab there.
  • At last, apply right click on the shortcut and tap on the “Pin to Taskbar” option there.

Creating Website Shortcut Icon via MS Edge

This browser provides the most convenient way to pin a website or task to your Taskbar. Pursue these instructions for adding a shortcut icon to your desktop:

  • In the beginning, launch your preferred site on the MS Edge browser.
  • Hit the menu icon located just at the uppermost right-hand side edge of your screen.
  • Now, scroll down your page until you get the option “Pin this page” to your Taskbar.
  • Once you find the option, and then tap on it.
  • After that, tap on the “More Tools” option and select the option “Pin this Page to Start.”

Creating Website Shortcut through MS Edge Chromium

Microsoft has recently launched a new Edge browser that works with the collaboration of Chrome features. It’s the combination of Google Chrome and MS Edge browser. This browser also allows the user to make a shortcut icon of their most preferred browser or website on the desktop.  Read these instructions to know how to create the website shortcut on your device:

  • First and foremost, launch the website that you wish to add to the Taskbar.
  • Then, hit the menu tab situated at the upper right side edge.
  • Now, tap on More Tools option there.
  • Hit the option “Pin to Taskbar” and then provide the name of your website.
  • At last, users need to hit the “Pin” tab.

Source :- https://securenorton.com/how-to-pin-a-website-to-the-taskbar-on-windows-10/

KellieMinton  arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving. Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at norton.com/setup  .

Pages: « 1 2 3 4 5 ... » »»

Show Your Work Here .Whatsapp 9301837771

Alexa Global Rank 99000

google ranking checker website hit counter

Sales

Manager