Add Zone For You

SITE123 - Website Builder

User blogs

Tag search results for: ""

Call of Duty recently released its first-ever Battle Pass for a price of approx. 10 dollars and it packs an abundance of content for the players. Even though players can avail of quality content in the free Battle Pass, it is the paid pass that offers premium gun skins, weapons, and cosmetics. It will not be the solitary update for Modern Warfare as Infinity Ward is set to release an update every week until January 28, 2020.

The decision to add a Battle Pass may have been a bit controversial, but technically it gives back more than it costs. If a player is able to reach 100 tiers in Season 1, then he can not only earn back the initial amount but can also get a hefty discount in the Season 2 Battle Pass.

So now the question arises, how can you reach tier 100 quickly before January ends? Do not worry as we will help you out. Here are 6 easy tips to quickly level up your Battle Pass in Call of Duty: Modern Warfare.

1. Paid Battle Pass

The first tip is the most obvious one; buy the premium Battle Pass. The Battle Pass can be purchased for 1000 COD Points, roughly amounting to 10 dollars. It will let you earn more points in quick successions as opposed to the free pass.

2. Trials

Start playing in the multiplayer Trial mode to earn some quick XP. Bonus tip: Activate a Double XP token before heading to the game and increase your XP earnings several folds in a rapid succession of time. The game in the Trial Mode does not take longer than 2 minutes, so try playing as many 2 or 3 starred games as you can.

3. Game Modes

Play more games in the Ground War mode as the games there take more time, which you would have instead spent waiting for a game to start. A game in the Ground War mode generally takes 18 minutes to wrap up, and you can easily score hefty XP in that period.

4. Rank Progression

You can utilize your Double XP bonuses in finishing Rank Progression missions, as well. These challenges usually include tasks like getting 6 headshots, consecutive scoring killstreaks, etc., so try completing an ideal challenge and double your gains.

5. COD Points

It is the in-game currency you can buy, and it is money-based instead of game-based. Veteran players may have some COD points in their accounts that they can use to level up the Battle Pass. This tip is effective but not recommended, as it can cost you a fortune to unlock all the 100 tiers. Unlocking one tier with COD points costs 1.50 dollars, so all the 100 tiers price can reach up to 150 dollars. Try playing multiplayer mode more, and you would have more than enough time to unlock 100 tiers before January 28, 2019.

6. Standard XP

You can earn the free XP as well to level up your Battle Pass quickly. Try playing the game frequently, and you can easily rack up some additional XP to help you out.

Source url:-

Ava Williams is a creative person who has been writing blogs and articles about cyber security. She writes about the latest updates regarding and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs and websites.


Darksiders franchise has brought its new version in the market, and fans and critics are acclaiming it. The most exciting news is that the game has arrived with the compatibility of PC, along with Darksider’s official gaming console Google Stadia. Even though the game contains archetypes of Diablo games, it still has the same tendency and gaming experience that its predecessor has. It is specially built for those who are keen on the coming of Darksiders 3 as now they can knock down the enemies again in a similar and preferred fashion.

The version has included few new changes such as now you can combat only in one mode; In Strife or War. Darksiders Genesis now contains 16 levels that take 10 hours to complete, and players are required to solve puzzles, collect resources, and combat with enemies. Almost every level contains hidden gems, resources, treasures, and players can attain as many souls and treasures as they want. Due to all this, players are keen to get back to the previous level in this game because it will help them to attain all these rewards again. The above-written scenario has already depicted the concern behind this blog. Read the whole blog below to attain the access to go back to the previous level in this game.

How to Get Back to a Previous Level?

If you have collected all the hidden gems from the previous level of the game, then there must be few hidden chests that you surely slip in grabbing. These chests include several souls that will give access to finishing the challenges quicker. Now, this must have sought your attention; here is the way to return to the previous level to seek the souls. You need to move towards Void and choose any available level. Before proceeding towards the method of this process, there are a few things that you must know :

  • You need to knock down your already defeated enemies again.
  • After returning to the previous level, all the enemies that you have conquered will get Respawned.
  • Respawning of the enemies will also include the boss of that level, and you need to beat it again.
  • Fortunately, you will get an option to select the type of difficulty you would like to face while completing that level again. It is recommended to select the Casual level from the difficulty tab in order to complete this Respawn level quicker.


The game is now only available for the Google Stadia and PC users because of this several Xbox, PS4 users are pretty sad. There is also a piece of news regarding Nintendo Switch, so soon they will also get access to this amazing game, and the users of Xbox, PS4 and Xbox one have to wait much more as the game will be released for them after February 2020. We hope that the blog will help you to get back to the previous level in this game. You don’t need to worry as using the Void is easy and secure and is specially built by the developers of this game. If you are a user of PC or Stadia and are new to this game, then it is recommended that you should try playing this game.

Source :-

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet, utility software and new media. She writes for McAfee products at


Pokérus is simply a wordplay on Pokémon and virus, and although it is a type of virus, gamers seek to get their Pokémon infected with it. The virus was first seen within the second generation of the Pokémon franchise and has been in the series ever since.

 In case you are not living under the rock, you must have heard about Pokémon Sword and Shield, the latest addition to the Pokémon gaming franchise. The game has been making headlines ever since its release, and it has not been all good. Even though the game has had its fair share of controversy, it still managed to become the most successful Pokémon game ever.

Now coming back to Pokérus, the virus acts as a booster to the Pokémon and provides Effort Values. There are some rules regarding the Pokérus, you must know.

  1. After getting healed, it will not spread from your one Pokémon to others.
  2. When one infected Pokémon is cured, it cannot get infected again.

Why Infect Pokémon with Pokérus

Despite being a virus, Pokérus has its benefits. They are:

  1. It can enhance Pokémon stats.
  2. Provides double efforts during battling.
  3. Offers double efforts even after battling.

How to Get Pokérus?

The chances of your Pokémon getting the virus randomly is pretty low, but you can get them infected by a trade. If we talk in numbers, then the chance of your Pokémon getting the virus after a battle is 1/22,000. The chances are even three times rarer than catching a Shiny Pokémon, so you are suggested to follow the tips we provide.

  1. Trainers can try adding an infected Pokémon in their team to increase their chances of getting infected.
  2. Your Pokémon can get infected after a battle, and if you trade your infected Pokémon with someone else, then their Pokémon can get infected as well.
  3. If you have friends in Pokémon Sword and Shield, then you can trade the infected with them and breed them in the Nursery.

How to Cure Pokérus?

As the virus is not status-based, you cannot cure it in the Pokémon Center or with items. Like any other virus, Pokérus goes out on its own in time. Pokérus will get cured in four days, and once cured, the Pokémon cannot catch it again.

The infected Pokémon will start the curing process on its own after a day changes in Switch, meaning if the game is switched off one day and reopened the other day, the Pokémon would be cured.

How to know my Pokémon has Pokérus?

Telling if a Pokémon has Pokérus is simple, and you can do so as well after following the given steps:

  1. Click X to launch the menu.
  2. Choose the Pokémon option.
  3. Click R and reach the boxes.
  4. Move over the Pokémon in the party.
  5. In case the Pokémon is infected, then it would present a pink face alongside an X over it. It will be visible in the box where the type is shown.
  6. Click A to get more information.
  7. Now reach Check Summary.

Note: In case the Pokémon is infected, you can see Pokérus flashing beside the marking options.

How to Prevent Pokémon from getting Cured?

Preventing your Pokémon from getting cured has its benefits, and if you wish to do so, then it is possible as well. If the infected Pokémon is kept within the box, then Pokérus is put under an infinite stasis. So trainers can keep the infected Pokémon in the box, and bring it out to infect other Pokémon. Keep in mind that even if your Pokémon is cured, it still earns double Effort Values. It merely stops being contagious, that is all.

Follow the steps and tips to earn double EVs via Pokérus Pokémon Sword and Shield.

Source url:-

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as


Apple introduced the feature of audio sharing on iOS 13.1 and iPadOS 13.1. Now, users can share audio from iPhone using Airpods. You can listen to music or watch videos with your friends. There are 2 ways to share from the device to Airpods. You can share audio using share audio features available on iOS 13.1 and iPadOS 13.1. If you want to know about it, then you are in the right post. Read through the blog and follow the steps to share music using Airpods.


The feature is available on iOS 13.1, iPadOS 13.1 or iPad, Pros, iPad, iPad Air, iPad Mini, and iPad Touch.

When it comes to supporting the headphones, Apple supports Airpods and Beats headphones. This feature works on Airpods Pro, Airpods, Beats X, Powerbeats Pro, or Beats Solo Pro. Any headphones of Apple that may have W1 or H1 chip.

How to Share Audio

If you want to share Audio, then abide by the given steps:

  1. Go to the Control center option from the Home tab.
  2. Click and hold on Now playing.
  3. Select the AirPlay tab.
  4. Users can also get there by clicking on the AirPlay tab in the Music App.
  5. Click on the Share audio option that is visible to you when connected to Airpods.
  6. Bring an iPad or iPhone near the device and connect the headphones to them.
  7. Press the Share Audio option.
  8. Then the devices will be connected to the iPad or iPhone.
  9. The device will have the tick mark next to it.
  10. Click on a box to tick the second pair of headphones.
  11. Now both devices will be connected to the iPadOS or iOS. Then you can play music, and this plays on both the headphones at the same time.

How to Control the Audio

Users can change the volume, play pause, and stop the audio as well as the control option on the Control Center. If you want to control the audio, then you can follow the provided steps:

  1. Go to Control Center.
  2. Drag volume option of a set of headphones or volume slider of a bottom to control the volume of both the headphones. You and your friend can also control the volume of the audio of both the headphones.

How to Disconnect the Paired device

In case you intend to disconnect one pair, then go through the below-mentioned steps:

  1. Go to the AirPlay screen.
  2. Click on a box to tick again.
  3. Users can also turn off the headphones and put the Airpods back to its case to stop sharing the audio.

Source url:-

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as

Devin Smith

There is no doubt that the DirectDraw Error is one of the frustrating issues users face while playing or using 3D programs. It usually shows an associated error when you launch a graphic-intensive game or software, which points out a problem with a 3D acceleration option. In some situations, it depicts the Direct3D file is missing or stops, and the application becomes unable to proceed further. In case your system is also facing the same issue, then underneath steps will help to eradicate it in the blink of an eye. 

Method 1: Turn on DirectDraw and Direct3D

DirectDraw is basically controlling the display driver, which helps via setting up the resolution and properties according to access video memory. In case it gets disabled, you may come across DirectDraw Error codes. So, here is how to check the status and turn it On systematically.

  • Head straight to the Start Menu and click on the Search icon.
  • Fill dxdiag into the required field.
  • Then press the Enter button on your keyboard.
  • Now, tap on the Display tab of the DirectX Diagnostic Tool.
  • Check the Status of DirectDraw and Direct3D that it is enabled or disabled.
  • If disabled, then click on the Win + R button to launch the Run Dialog.
  • Type appwiz.cpl and hit Enter button.
  • Choose Turn Windows Futures On or Off option.
  • Search for Legacy Components and select its checkbox.
  • After that, expand the Legacy Components and tap on the DirectPlay option.
  • In the end, click on Ok to apply the changes.

Method 2: Update DirectX

The following guidelines will help fix the problem in case it occurs because of outdated DirectX. So, pursue the steps that check the version your system needs right now and update it accordingly:

  • Go the Taskbar Search Box and write dxdiag.
  • Then tap on the Enter button on your keyboard.
  • Check the version info available at the bottom side of the screen.
  • If your DirectX is outdated, then click on Win + I button simultaneously.
  • Choose Update & Security.
  • Now, hit the Check for update option.
  • Wait for a while until your system completes the update.

Method 3: Update Video Driver

Once the video driver becomes corrupted, outdated, or goes missing, the DirectDraw Error can cause a problem in your system. To fix it, here are the steps you need to pursue:

  • First and foremost, right-tap on the Start icon and search Run.
  • Choose the best match from the list and open the Run Dialog box.
  • Insert devmgmt.msc into the required field and proceed.
  • Look for the Display adapters and expand the following.
  • Right-click on the Graphics driver and choose Update driver.
  • Now, search automatically updated driver software and then follow the prompts.

Method 4: Reset the Screen Resolution Compatibility

DirectDraw Error is somewhat related to the incompatible screen resolution. So, follow the instructions and learn how to adjust it:

  • Right-click on the software or game that causing the DirectDraw Error.
  • Choose the Properties from the list.
  • Head straight to the Compatibility tab.
  • Press the Run in 640 x 480 screen resolution checkboxes.
  • Tap on Apply and then Ok option to save the changes.

All in all, the methods described above will help you out of the hard part and will conveniently solve your DirectDraw Error. So, make sure to follow the steps until you figure out the best method to eradicate it.

Devin Smith is a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites. 



In Pokemon Sword and Shield, there are various power boosters known as “Technical Machine” (TM). These TMs provide more energy for the battle. There are a total of eighty-six TMs in this game. You could purchase some of them while various others are hidden in all the “Galar” areas.

TMS enables your Pokemon to acquire important and special moves. It teaches various moves to Pokemon, and they learn these moves as per their species.

Here is the description of all the TMs along with their complete locations where they can be found.

Details of Various Technical Machines and their Locations

Muscle Packed Mega Punch

It is basically a muscle boosted energy punched at the desired target. It includes “Accuracy,” “Power,” and “PP”: 85, 80 and 20 percent.

Location: It could be purchased in Hammerlocke’s “Eastern Pokemon center” for about ||10,000.

Imposing Damage by Pay Day

In this TM, you have to throw multiple coins on the desired target for imposing damage. You will earn multiple ones only after completing the fight.

It involves TMs: “Power,” “PP,” and “Accuracy” 40, 20, and 100 percent.

Location: You have to visit the “Pokemon Center” located in “Motostoke.” You can identify it with the unique texture and paint of the garage door painted with the “Lapras” image. On the way to the Pokemon center, there will be a windmill as a mark of identification. It will be found just nearby the water body.

Fiery Fist Punching 

You can punch your target using the fire punch with your burning fist. It is possible to leave your target with fire.

It comprises of the power factors classification of this TM as: “Power,” “Accuracy,” and “PP” 75, 100, and 15 percent.

Location: The trainer can purchase it in just ||50, 000 by visiting the “Pokemon” Center located in “Wynton.”

Power-Packed Ice Punching 

The target can be hit using the ice punching with great power.

It includes “Accuracy,” “Power,” and “PP” 85, 80 and 20 percent.

Location: It can be purchased from Wyndon for just ||50,000.

Electric Punching

The Electric punching involves electrified power boosted fist punching. It might leave the target paralyzed.

It combines the “Power,” “Accuracy,” and “PP” 75, 100, and 15 percent.

Location: It can be purchased for just ||50,000 from the “Pokemon Center” situated in “Wynton.”

Flying Attack

This TM involves various attacks while flying. The user strikes the target in the upcoming move while flying.

It includes “Accuracy,” “Power,” and “PP” 95, 90, and 15 percent.

Location: You have to communicate with the particular Corviknight driver for flying. He will be inside the stadium of “Stow-on- Side” city.

Sharp Spiked Missile

This TM hits minimum two times in one shoot. It consists of sharp pins for shooting at the desired spot at a rapid speed.

It consists of “Accuracy,” “Power,” and “PP” 95, 25, and 20 percent.

Location: It might be on the yellow grass where the kids were in Pikachu dress.

Powerful Hyper Beam

You can hit your objective using an energy beam.

It consists of “Accuracy,” “Power,” and “PP” 100, 150, and 5 percent.

Location: It will be available for just ||50,000 in Wyndon from the “Pokemon Center.”

Power-Packed Giga Attack

This TM can be used by hitting a punch on the desired target.

It involves “Power,” “Accuracy,” and “PP” 150, 90, and 5 percent.

Location: It is also found from the “Pokemon Center” located in “Wynton.”

Scattering Curious Leaves

The user has to throw magical leaves on the target. In this TM, the destination attack never fails.

In involves “Power,” ” Accuracy,” and “PP” 60, 0, and 20 Percents.

Location: It can be achieved as a reward after winning the gym battle.

Blasting Solar beam

In this TM, the user has to fire or explode a bundled light beam in the upcoming run. It can be achieved by gathering solar beams together.

It comprises of “PP,” “Accuracy,” and “Power” 10,100 and 200 percent.

Location: You have to ride your bike on water and is only applicable if you upgraded your bike. You have to enter the water, keeping head up your bike. Then look at the left side. You will find your TM there.

Solar Energy Blade

In this TM, the user has to hit his target as a two-turn mode after collecting solar beams, and then he has to fill the blade with powerful lights. He has to attack the target in the upcoming run.

It includes: “Power,” “Accuracy,” and “PP” 125,100 and 10 percent.

Location: It can be found from the “Pokemon Center” in “Wyndon” for just ||50,000.

Power Boosted Fire 

The target can be achieved by hitting the target with power-packed fire spin as a burning ball.

It contains “Power,” “Accuracy,” and “PP” 35,85 and 15 percent.

Location: It can be purchased for just ||10,000 from Hammerlocke’s “Pokemon Center.”

Electric Wave

It paralyzes the target by hitting a jolt of electrified thunder volt.

It consists of “Accuracy,” “Power,” and “PP” 90,00, and 20 percent.

Location: You have to finish your “Rotom Rally” relay to get this attacking feature.

Ground Digging

In this TM, the user has to dig the ground, which makes him unable to attack in the upcoming turn.

It comprises of “Power,” “Accuracy,” and “PP” 80,100 and 10 percents.

Location: To get this Digging attack, you have to visit the “Pokemon Camp,” by searching the route-six. It will be located on the right-hand side of the particular campsite.

Source url:-

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as


“Pokemon Sword and Shield” provides various options like water, grass, and fire Pokemon, to select as a starter Pokemon.

The player has three Pokemon available for fighting: “Sobble,” “Grookey,” and “Scorbunny.”

The Starter Pokemons plays an important role in starting the battle. Here are the main characteristics of these three:


It’s a grass Pokemon and can produce a melody by beating the stick and pulps out on his enemies. It’s first, and foremost challenge is “Milo,” the leader in the “Tuffield” – a grass type user. It can fight against the water Gym leader “Nessa,” which you can tackle it down.


It’s a fire type Pokemon and has power-packed fire features, and can single-handedly tackle the grass type Pokemons as it fires solar beams and heat rays.


It’s a water Pokemon and has all the commands over water. It engulfs his foes on the basis of his power and energy. It is one of the interesting Pokemon among Starter Pokemon in “Sword and Shield.”

Here are the description and your solution for getting the other two Pokemon.

The simple and easy way to find all the Pokemon is the three-way trading process by breeding each Pokemon from the nursery located at Route-five of the main road.

Getting all Starter Pokemon

In case, the player has the “Scorbunny” as a “Starter Pokemon,” then, he has to breed the Pokemon and then trade it with another player for the next desiring starter Pokemon “Sobble.” After that, he has to breed Scorbunny once again to trade for the “Grookey” the third Starter Pokemon with any other Pokemon Player.

For the breeding process, the player has to visit the “Pokemon Nursery” located at “Route-five” on the main road. They also have to upgrade their bikes for surfing on water bodies. It can only be possible by communicating with the doctor from whom they unlocked the bike. The location of the doctor is Route- nine.

Now, the players have to surf on the Outrage Lake to snap a “Ditto.” Then, they have to breed their starter Pokemon with Ditto by visiting the nursery. The nursery will provide an unhatched egg to the players. They have to carry it inside the party slot for some time. After that, the egg will hatch, and this way, players will get their second Starter Pokemon.

After that, the Players have to trade their Pokemon with someone else who wishes to trade with their Pokemon. They have to communicate with their other Pokemon fellows for the trade. Now, two friends will trade with their Pokemons, and then they have to trade for their third desired Starter Pokemon by searching another player who wishes to trade with the third Pokemon. In this way, they all will get all the three “Starter Pokemons” and thus creates a three-way trade between three players and trading for three Starter Pokemons.

Source url:-

Ava Williams is a creative person who has been writing blogs and articles about security. He writes about the latest updates regarding and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.


The display adapter is an important part to connect the Surface to the smart TV. Its malfunctioning may cause hindrances in your experience of viewing multimedia on an additional display. There are various issues that users reported while analyzing issues in the working, not having sound or other connecting issues.

Various issues are arising when your MS adapters fail to respond, such as:

  • Problems in the playback with audio and videos
  • Connection failure in the adapter while connecting to the device.
  • The display is not properly scaling or fluctuating display issues.
  • Problems in the adapter application while running.

In case, your MS Display Adapter is not functioning on Windows 10, then this article will help you. Here is how to troubleshoot MS Wireless adapter issues:

1. Problems creating with the Application of MS Display Adapter

A. The Application displaying the message, “You are not connected.”

  • First of all, check that the HDMI and the USB of your adapter are attached properly to the HDTV, projector and the monitor.
  • Hit the “Refresh” tab in Application.

 B. “Waiting for Connection” error displayed by the Application

  • First of all, you have to check that your device is properly linked with the adapter.
  • Then try to eject and connect it again in order to see whether the connection resumed or not.

Follow these instructions if you want detailed steps:

  1. First of all, from the right side corner of your device, swipe the screen, or alternatively, you may hit the “Action Center” option located inside your taskbar.
  2. Then, tap on the “Connect” button. After a while, your display adaptor will display on the uppermost portion of the menu bar.

Note: In case the adaptor hasn’t appeared, it means that your device is not properly connected.

  • Now, you have to choose the name of your display adaptor from the available options and then hit the “Disconnect” option there.
  • Swipe from the right-hand side corner of your device and then hit the “Action Center” there.
  • After that, tap on “Connect” and locate the “Microsoft Display Adaptor” from the available list in order to connect the device once more so that the connection resume successfully.

Note: Do not use the proxy server for accessing internet connection because your adaptor will not work in this case.

2. The display is not Coming Properly, Missing or not Scaling

In case a portion of the display is not appearing properly on the second screen, it means the display is not scaling accurately. Follow these steps to troubleshoot this issue:

A.  Adjusting Resolution

  1. First of all, you have to enter “screen resolution” into the search box available on the taskbar.
  2. Then hit the option “Change the screen resolution” from the available result.
  3. After that, go to the “Resolution” section and then hit the “chevron” for the pull-down menu and then tap on the recommended resolution.

Note: The topmost resulting resolution is meant as the recommended resolution on your device.

B. Using Microsoft Display Adaptor application for display adjustment

You may use your adaptor application for adjusting the screen settings for scaling the screen of your HDTV, projector, or monitor.

Follow these steps to do this:

  1. First of all, launch the MS display adaptor application.
  2. Then, go to the section “Adjust Display” and then drag your slider towards the right-hand side till you view everything located on your particular device on your projector, monitor, or HDTV.

3. Issue creating with your Audio or Video playback

A. Nothing appearing on the second display

  1. First of all, check that the device has already set to “duplicate” or maximize the display.
  2. Now, eject your USB end from the adapter to switch it off and then plug it again to enable it.
  3. Now, check that your projector, monitor, or HDTV is already set to your “HDMI” source channel.
  4. In order to adjust the video input management from your screen, you have to look for the product description manual which came with it, or you may also navigate to your product manufacturers’ site.
  5. After that, check and then ensure that your monitor, projector, or HDTV is properly supporting HDCP. In case you are not sure about this matter, then it is recommended to refer to the user’s manual or visit your product manufacturing official portal.

Source url:-

Ava Williams is a creative person who has been writing blogs and articles about cyber security. She writes about the latest updates regarding and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs and websites.


“Xbox Live” is a digital multimedia and multiplayer gaming service developed by “Microsoft,” which runs online. It was available for the Xbox system firstly.

In case you are using Xbox Live, then you must want to take a profile image for your Gamerpic, which suits your data and profile. Sometimes, users want to customize their Gamerpic Image that will display just after the “Gamertag.”

Microsoft provides a feature of customizing avatar or Gamerpic. You can upload it from any of the drives or from your saved images as your custom image.

Here is how to upload your customized Gamerpic on the Xbox Live profile image.

Creating Customized Gamerpic on Xbox One

  1. First of all, launch your guide menu by tapping on the “Xbox” tab from the controller.
  2. Then, you have to rotate your joystick upward on the uppermost portion towards the profile segment.
  3. Now, apply the tab “A” to hit the “My Profile” section.
  4. Next, you have to choose the option “Customized Profile” through the joystick and “A” tab.
  5. After that, you have to choose the option “Change gamerpic.”
  6. Now, tap on “Upload a custom image” option there.
  7. After that, you will be prompted to a new “UWP File Picker” application.
  8. Then, go to the directory consisting of your image from the “USB” stick.
  9. Next, you can tap the “View” button from the controller to turn to a specific application like “Photos.”

Note: The “Application” brings together all the data and images you have stored in the “OneDrive” images directory.

  1. After that, go to your desired image that you wish to use your joystick and “A” with it.

Note: Your images should be a minimum of 1080*1080 size.

  1. Now, crop and edit your selected image.
  2. Once you have finished the above steps, hit on “Upload”, Microsoft will authenticate your image in a while.

Creating Xbox Profile Picture through Windows 10 

  1. First and foremost, launch the “Xbox Console Companion” application on your PC running on Windows 10. Alternatively, you can launch it by searching the application through the “Start” menu. To do this, you have to type “Xbox” into the search bar and then search the application.
  2. Now, choose an image for the Gamerpic profile located at the uppermost left side edge. It appears as a circle holding your existing Gamerpic.
  3. After that, hit the “gamerpic” in order to edit it.

Note: Hit the “Switch to Gamerpic” option in case the profile is set to having an avatar.

  • Now, you have to select the option “Choose a custom picture.”

Note: The applied picture size must be under the resolution of 1080*1080.

  • Next, hit the option “Upload a custom image.”
  • After that, browse your file and hit it.
  • Then, crop your image located inside the circle with the help of your mouse. After that, tap on the “Upload” tab.

When Microsoft finishes the authentication of your image, it will display on both “Xbox One” and “Windows 10.”

Resizing the image to 1080*1080

It became very important to have a picture resolution of 1080×1080 if you are customizing a Gamerpic or Xbox Live profile. If you don’t have the image according to this resolution, then you must want to resize your stored image.

Here, we are providing various easy to use steps to guide you for resizing the picture for your Xbox profile with the help of a resizing application “Polarr”:

  1. First of all, you have to download “Polarr” by navigating “Microsoft Store.”
  2. Then, launch “Polarr” and hit the option “Open Photos.”

Note: It will give provide you a tutorial in case you are first time user.

  • Now, you have to browse your desired image.
  • Hit the option “crop tool” present at the central right-hand side of the page.
  • Next, tap on “Aspect” so that we could edit and crop it as per the desire.
  • Then, choose the ratio 1:1 and then drag your square to the section of your image you wish to use as the profile image.
  • Once you have finished, =navigate to the right-hand side of the screen and then tap the blue-colored mark option.
  • Now, tap on the “Save” option present at the top right side of the screen. It appears as an upward shaped arrow sign.
  • Then, choose the option “presets” as given below and then hit the “Instagram Post” that matches the resolution “1080×1080” required for your gamerpic or Xbox.
  • Now, tap on “save a copy” and provide a name for your newly created image and save it in a convenient location somewhere on your system.
  • Now, follow the steps as mentioned above for uploading the profile image to Xbox Live by using the “Windows 10 Xbox” application.

Source url:-

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as

Alex IT Expert

The Network adapter failure issues are found mainly after the Windows 10 update of KB4515384. Most of the users report issues found in the search and start menu with certain gaming and audio issues.

In case your device is affected by the issue, then you may use these methods and steps to fix this issue of the wireless network adapter.

Fix: Network Adapter After Installing Update KB4515384 on Windows 10 - McAfee Activate

1. Network Adapter Error

This wireless network error is mainly found in the Intel and LAN cards. In this case, your Lan or Intel chip may corrupt and can stop functioning.

The Device manager reflects a device error and shuts at once while trying to perform any operation on your system. Removing the update KB4515384 may solve your issue. If your system hangs on failure updates, then you may send feedback to Microsoft for support regarding the issue. To do so, tap Window + F Keys and expand the feedback form.

Read More

2. Fixing Wi-Fi Adapter Through Device Manager

Follow these steps if you wish to troubleshoot the Wireless Network adapter issue:

First of all, launch Settings.

  1. After that, locate the “Device Manager” option and hit the uppermost available result.
  2. Now, open the tab dedicated to “Network Adapters.”
  3. Then, you have to the right-click on the option for Intel wireless adapter that is raising the issue.
  4. Next, hit the “Disable device” option here.
  5. After that, tap on the option “Yes.”
  6. Now, right-click from your mouse on the wireless adapter once more and choose the option “Enable Device.”
  7. Next, you have to reboot your system.
  8. Once you have rebooted your PC successfully, then try to connect your wireless adapter to your system.

3. Fixing Wi-Fi Adapter through Windows Update

If you intend to troubleshoot this issue, then you can delete the particular update as an alternative way.

Follow these steps to fix Wireless adapter via Windows Update:

  1. Firstly, you have to launch the “Settings.”
  2. After that, hit the option “Update and Security.”
  3. Then, tap on “Windows Update” now.
  4. Next, click on the option “View Update History.”
  5. After that, tap on “Uninstall Updates.”
  6. Now, you have to choose the option from the list “Update for MS Windows (KB4515384).”
  7. Then, tap on the option “Uninstall.”
  8. After that, you have to hit the “Yes” tab here.
  9. At last, you have to click on the tab “Restart Now.”

Note: Check the device to see if it is properly working with wireless networks or not.

Source :

Alex Smith a creative person who has been writing blogs and articles about cyber security. He writes about the latest updates regarding and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

Pages: 1 2 3 4 5 ... » »»

Sujay Bhaattacharjee The Man Behind Senstional Design

Alexa Rank 299000

google ranking checker

Website Page View Hit