Breaking Bad has been among the highest-rated shows on IMDB ever since its release in 2008. The series was created by Vince Gilligan and is considered one of the best TV series of all time. Starring Bryan Cranston (Walter White) and Aaron Paul (Jesse Pinkman), the story revolves around a school teacher who gets diagnosed with cancer. The events lead him to become a drug dealer and criminal as well. The series concluded way back in 2013, and there is a spin-off series by the name of Better Call Saul running currently.

Even though the story has concluded over six years ago, theories and hype surrounding it never indeed died. Recently the entire internet was astonished when it was revealed that a movie after the events of the show had been set to release. El Camino will be showcasing Jesse Pinkman’s run after he finally breaks through his imprisonment. There are rumors surrounding Walter’s role in the movie, but it seems like they are just rumors.

The official trailer for the movie dropped on Netflix’s official YouTube channel recently. The trailer more or less confirms the death of Walter White at the end of the series. The trailer was played during Emmy Awards 2019 as well, and Jesse is shown there to drive a vehicle, trying to run away. The radio in the car announces that when the police arrived on the scene, there were already nine male bodies present there. There is no random information provided in the Vince Gilligan universe.

Seeing how the trailer did not show off any significant detail, it is somewhat confirmed that the announcement was for the fans who expected Walt to return. The theories about Walt being alive have been floating ever since the season finale Felina aired. In the epic show finale, Walter drives into the Nazi gang. In the showdown he manages to kill off every single member of the group, resulting in Jesse’s freedom.

It allows Jesse to run away from the scene, but he first puts a gun on Walt’s head. After a climactic staredown, Jesse throws down the gun and runs away in a car. Walt is then shown to walk a bit, but after losing a substantial amount of blood, his vision finally fades. Vince Gilligan rarely puts any information by accident so it can be taken as a hint to the fans expecting Walt’s return.

However, this does not rule out his possible cameo in the movie, as Jesse does not seem to be in a stable condition. It is very likely that Walt will appear in Jesse’s hallucinations. It makes sense as Jesse and Walt have faced numerous achievements and mishaps together. Jesse has been with Walt from the first season, so it is evident that they were close to each other.

It would be interesting to see how the movie portrays Jesse after Walt’s death and the tragic events that Jesse endured. Rumors suggesting Krysten Ritter (Jane) return in El Camino have surfaced as well. This could be true in Jesse’s hallucinations as well. Whatever, the movie delivers; the hype and expectations surrounding it are substantial.

Source :- https://karenmintonblogexpert.wordpress.com/2019/09/28/el-camino-breaking-bad-walter-whites-death-confirmed/

It does not matter if you have never played PC or console games, it is still highly likely that you must have heard the name Call of Duty. Such is the popularity and wide fanbase for the classic warfare game. The game initially released back in 2003 and was focused on the events of World War 2. However, with time, the game even covered modern war events like the Cold War. The game is available for almost every major gaming platform like Windows, PlayStation, Nintendo, Xbox, iOS, and Android.

Recently, the multiplayer beta tests for the upcoming installment Call of Duty: Modern Warfare came out. The results showed the installment to be the most famous one for the franchise. The developer Infinity ward released a beta version for game’s multiplayer edition. It included a two vs. two alpha and both open and closed beta periods.

CoD comes with a new series every year, and the 2019 one seems to be a massive hit among the fans. Infinity Ward and Activision have marked the installment as both remake and reboot of the original Call of Duty 4: Modern Warfare. They are marketing the game as a more realistic and sadist take on the war affairs, along with a step ahead for the CoD formula.

The astonishing production values of the game are clear, but it has had its fair share of controversies as well.  The theme of the movie and its exclusive content deals with PlayStation has earned some backlash for the game. Despite all these controversies, backlash and buzz, the multiplayer beta edition was made available to a wide audience. The beta version was marked successful by Activision’s reports.

Activision stated that the beta was the most successful in CoD history. The tests for beta edition included the most hours played, the highest online players, and the most number of users across all playable platforms combined. Activision did not release the exact number; however, “millions” of users are reported to take part in it.

The tests were taken for two consecutive weeks, which started on September 12 and ended on September 23. The analysis also offered the much-awaited feature, Crossplay. It allows players from different platforms like PS4, PC, or Xbox One to play against each other. This was the first time for Call of Duty to facilitate such function.

The beta offered a chunk of the gameplay which tempted an even higher number of users to play the game. The users could prepare their custom rooms and unlock any weapon of their choice.  The weapons were surprisingly upgradable as well. Of course, the Crossplay feature could be accounted for the significant number of users as well, because it allowed several platforms to compete together. The 64-player Ground War mode along with its latest vehicles, was made available as well. Activision states that the full retail edition of the game can chunk in over 100 players for the multiplayer version.

The game will not have any royal pass or DLC maps. The roadmap has far-reaching content, and if the beta version was any indication, then the game will entertain users for a long time. The marketing campaign will have to keep in mind the weight on its theme. Then the game is sure to be a hit. The fans are understandably excited to play the full version of the game. The expectations from the game have skyrocketed, and it will be interesting to see how it plays out.

Incognito Mode allows you to surf the web in a private window. It automatically deletes the browsing data once the window is closed. Also, it is best to surf in incognito mode when using public devices. If you want to disable Incognito Mode, then read on.

Turn Off Chrome’s Incognito Mode Through the Registry Editor

If you want to turn off Chrome’s Incognito mode through the registry editor, then you need to follow the instructions given below.

• First of all, press Windows + R keys to access the Run screen.
• Then you should enter “regedit” in the Run’s dialog box.
• Click on OK.
• Enter the following URL in the bar.
• Hit on the Enter key.
• You should select the Chrome’s registry folder.
• When you can’t find this folder that means you are required to use the Command Prompt process.
• You have to right click on the registry “IncognitoModeAvailability” & then choose the “Modify” option. You can see the new window.
• Go to the “Value Data” box & enter 1 in it.
• Hit on OK.
• You have to disable the Registry Editor & launch the Google Chrome.
• Then you will see “New Incognito Window” option wipe out completely.

Using Command Prompt to disable Google Chrome Incognito Mode

You need to use command prompt to disable Google Chrome Incognito mode. Follow the instructions given below.

• Launch the Start menu.
• Go to the search bar & enter “Command Prompt.”
• Select the Command Prompt from the results & right-click on it.
• Choose the “Run as Administrator” option.
• Enter this command “REG ADD HKLM\SOFTWARE\Policies\Google\Chrome /v IncognitoModeAvailability /t REG_DWORD /d 1.”
• Then hit Enter.
• Disable the Command Prompt screen & re-type Chrome.
• You will no longer see “New Incognito Window” option.

Turn Off the Incognito Mode Through MacOS

If you want to turn off the Incognito mode through MacOS, then you need to follow the instructions given below.

• First & foremost open the “Terminal console.”
• Type the following command: ” defaults write com.google.chrome IncognitoModeAvailability -integer 1″.
• You should hit on the Enter key.
• You have to reboot the Mac.
• Open Google Chrome.
• Go to the Chrome menu.

Turn Off the Mozilla Firefox Private Browsing Mode

 You need to turn off the Mozilla Firefox private browsing mode. Follow the instructions given below.

• To get started, launch the Mozilla Firefox.
• Then you should go to the menu icon.
• Select “Add-ons.”
• Choose the “Find more add-ons” option.
• Enter in “Private Begone.”
• Hit the Enter key.
• Choose the application from the list.
• Click on “Add to Firefox.”
• When the pop-up comes, choose “Add.”

Turn Off the InPrivate Window in Microsoft Edge

If you want to turn off the inprivate window in Microsoft Edge, then you need to follow the instructions given below.

• Get started by pressing Windows +R keys to access the “Run” command.
• Enter “gpedit.msc.”
• Choose “OK.”
• Now, you can see the Local Group Policy Editor.
• Go to Computer Configuration and select Administrative Templates.
• Navigate to the Windows Components & choose Microsoft Edge.
• Locate the “Allow InPrivate Browsing” setting.
• Double click on it.
• Select the “Disabled” option.
• Now, click on OK.

Turn Off Incognito Mode on Android through Third Party Applications

You need to turn off incognito mode on Android through third-party applications. Follow the instructions given below.

• First, you have to go to the Google Play Store.
• Then you have to install the “DisableIncognitoMode” application.
• Launch the DisableIncognitoMode app.
• Navigate to the “Open Settings” option.
• Toggle the notification access by tapping the switch near the “DisableIncognitoMode” application.

Source :- https://karenmintonblogexpert.wordpress.com/2019/09/27/how-to-disable-incognito-mode/

Nowadays everyone wants fast connectivity, and in case the servers are responding slowly, then you need to use any other available platforms, which is the last option for you. The reason behind this is the configuration errors which are generated on any server. If you want to know the steps to monitor server configuration using the server configuration monitor, then follow the instructions mentioned below.

Steps to install the Server Configuration monitor

• Click on the Orion Installer which you have already downloaded and execute the file.
• Let the Orion Installer load up on the system.
• Once you have done this, select the Lightweight Installation option.
• It is given on the first page.
• Select where you want to download the product by pressing on the Browse option.
• Press on the Next option.
• By going to the Products webpage, ensure that the Server Configuration Monitor is chosen.
• After that, press on the Next option.
• Then, install the Orion Installer.
• After that, agree on the terms and conditions of downloading the Orion Installer.
• Click on the Next option.
• The installer will begin the downloading process of the Server Configuration Monitor.
• After that, start downloading the product.
• Wait till the downloading process gets completed on the system.
• After installing the Server Configuration Monitor, you will get the Configuration window on the screen automatically.
• Press on the Next button.
• Press on the Service Settings tab, press on the Next button.
• Press on the Next option.
• Now, the Configuration window will start.
• After that, press on the Finish option.

Steps to discover the network

• Now, you need to make a password for the administrator account,
• For completing this procedure, press on the Save and Login information.
• By going to the taskbar, click on the Settings tab.
• Press on the Network Discovery option.
• Press on the Add New Discovery option.
• Now, you need to select the discovery method for the network.
• You will get the four options on the screen.
• Select and then enter the information.
• Then, press on the Next button.
• Now, it will open the Agents webpage.
• Checkmark the “Check existing nodes polled by an agent for node changes and updates” option.
• Press on the Next button.
• By going to the SNMP webpage in case, the devices are accessing the SNMPv3, press on the Add New Credential option.
• After that, enter the necessary details.
• In case you are currently accessing the community strings instead of the public or private, then start adding the Add New Credential option.
• In case it is not, then press on the Next option.
• Then, click on the Windows webpage.
• In case you are discovering the Windows devices, start adding the information by pressing on the “Add New Credential” option.
• Press on the Next option.
• Select the WMI option in case you discover the Windows devices.
• In case you select the WMI option, then the window will choose the WMI.
• After that, select the SNMP option.
• Press on the Next button.
• In case you want to scan, then start changing the Frequency option.
• It is located on the Discovery Scheduling webpage.
• Then, press on the Discover option.

Source :- https://karenmintonblogexpert.wordpress.com/2019/09/27/how-to-monitor-server-configuration-using-server-configuration-monitor/

Along with Outlook account, you can set up and use other email accounts in Outlook. You can link Outlook with different email accounts such as Gmail, and handle all your emails in one place. So, before you change the Outlook account password, determine the account you’re using in Outlook. If you have not linked any account with Outlook, then you need to change your Microsoft account in order to change the password of your Outlook account. In this guide, you’ll learn about changing the password of Outlook linked accounts, and Outlook (Microsoft) account.

Changing the password of Outlook linked accounts

Though, you can change the password of the account linked to Outlook from their own password reset page. But, if you want to change the password that you use to access that email services in Outlook (App passwords), then you can reset it directly from the Outlook app. Here is how.

1. Open your Outlook app.
2. And, click ‘File’ at the top left corner.
3. Click ‘Info’ in the popup menu. This will open the account information section.

In Outlook 2003, you need to click on ‘Tools’ and then click on ‘E-mail Accounts’ in the popup menu.

4. Open the ‘Account Settings’ menu and then click on ‘Account Settings.“ Doing so displays all the accounts linked to Outlook.

In Outlook 2003, click on ‘View or change existing email accounts.’

5. Look for the account whose Outlook password you want to change and select it.

Note: This will not change the actual password of the linked email account. If you want to change the sign-in password of the account, then visit the password-resetting page of that email service.

1. After selecting the account, click on the ‘Change’ button. This will show you the information of the selected account.
2. Go to the Logon Information section, and click inside the ‘Password’ field.
3. Now, enter the password into it.
4. Click ‘Next.’

The changes in the password will be saved. Now, Outlook will attempt to access the account with your provided password. If everything is fine, Congratulations! message will appear.

Changing the password of your Outlook Account (Microsoft)

The password of your Outlook, Live, and Hotmail email is the password of your Microsoft account. As all of these accounts need the Microsoft account for signing in. Therefore, to change the Outlook account’s password, you’ll need to reset the password of your Microsoft account. Hence, this will change the password of the entire services associated with Microsoft, such as your Windows, Xbox Live, as well as Skype password. If you are sure about changing the password of your Outlook (Microsoft) account, then here is the procedure.

1. Go to ‘account.live.com/password/reset’ to access the password-resetting page of Microsoft.
2. Click ‘I forgot my password’ option and proceed with ‘Next.’
3. Now, provide the email of your Outlook (Microsoft) account and enter the correct captcha.
4. Click ‘Next.’
5. Now, select an option to verify your identity and proceed.
6. Fill up the security code, which Microsoft has sent you to verify that it’s you.
7. Click ‘Next.’ Reset your password form comes up on the screen.
8. Now, enter and confirm your new password and save.

The password of your Outlook account will be changed. Thus, the password for Microsoft and complete Microsoft associated services has been changed. Now, you’ll need to use this password to access your Outlook account as well as other Microsoft services.

Source :- http://norton-norton.uk/how-to-change-the-password-of-your-outlook-account/

Kellie Minton  arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving. Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at norton.com/setup.

Pop-ups are useful only until they display important information. But, when they start appearing unnecessarily and showing unwanted things, then they will become the most irritating thing on the internet. Therefore, most of the browsers have a built-in pop-up blocker that helps their user to keep them away. If you’re also fed up with unwanted pop-ups that disturb you while you’re reading something important, then activate the pop-up blocker in your browser.

Activating Pop-up blocker in Safari

In order to prevent the pop-ups in your Safari browser, you’ll need to select the ‘Block pop-up windows’ option under the Security tab of Safari Preferences. Here are the detailed steps.

1. Open your ‘Safari’ browser.
2. Now, go to the ‘Safari menu.’
3. Click ‘Preferences’ in the Safari menu. Safari preferences window will open in your browser.
4. Look for the Security tab in the top tabs menu and click it. It is displayed by a lock icon.
5. Now, place a checkmark in the box of ‘Block pop-up windows.’

Pop-up blocker is now activated in your Safari browser. Now, you’ll get less or no pop-ups in your browser. If still, you see lots of pop-ups, then possibly your browser is infected with adware infection. You need to use AdwareMedic or other tools to deal with this trouble.

Activating Pop-up blocker in Google Chrome

Possibly, most of you are using Chrome in your device because of its simple interface and powerful functioning. Just like other things, enabling pop-up blocker is simple in the Chrome browser. Here is how.

1. Open your ‘Chrome’ browser.
2. Now, go to the ‘Chrome menu.’
3. Click ‘Settings’ in the Chrome menu. Chrome’s Settings window will open in the browser.
4. Scroll until you reach the bottom of the settings, and then open the ‘Advanced’ Chrome settings.
5. On the next page, go to the ‘Privacy’ section.
6. And click on ‘Content Settings.’
7. Go to the ‘Pop-ups’ section.
8. Look for the ‘Do not allow any website to show pop-ups’ option and select it.
9. To see the permitted sites to display pop-ups, click on ‘Manage exceptions’ option.

Now, no website will display the pop-ups except the permitted ones. If you still get them too much in your Chrome, then your browser might have been infected with malware or adware infection. You need to use an adware or malware remover program, such as AdwCleaner, HitmanPro, or AdwareMedia.

Activating Pop-up blocker in Mozilla Firefox

To prevent pop-ups in Mozilla Firefox, you have to select ‘Block pop-up windows’ under the Content tab of Firefox Options window. Here is how.

1. Open your ‘Mozilla Firefox.’
2. Click on ‘Firefox menu’ button.
3. Now, click the ‘Options’ in the Firefox menu. You’ll see the Firefox Options window in your browser with the various options in the left menu.
4. Open the ‘Content’ tab from the left menu.
5. Now, place a checkmark in the box of ‘Block pop-up windows’ below the pop-up’s heading.
6. To see the permitted sites click on ‘Exceptions’ option. You can allow more sites by adding them to exceptions.

The pop-up blocker will be activated in your browser. Now, you’ll see pop-ups on the permitted websites only. Try the tools recommended for Google Chrome (above), if you still get unwanted pop-ups.

Source :- http://1norton.uk/how-to-enable-pop-up-blocker-in-any-popular-browser/

Kellie Minton  is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Deleting a video from YouTube channel can be done quickly. You can delete them permanently or else hide them from the public. Go through this blog carefully for knowing the steps to do the same.

1. The method of deleting a YouTube video on PC
2. Firstly, view the web browser.
3. Then, go to YouTube.
4. After that, choose log-in. It shall be towards the above at the right-hand side corner of the display.
5. Next, put your Google ID information.
6. Then, choose the Google Account symbol. It shall be towards the above at the right corner.
7. After that, whenever the pull-down menu gets displayed, choose YouTube Studio.
8. Then, choose Videos. It shall be placed towards the left-hand menu pane.
9. After that, move the mouse cursor to the video that you want to remove.
10. Next, choose the three vertically aligned dots.
11. Then, press on Delete.
12. After that, put a tick on the checkbox that has been displayed on the screen for giving the confirmation for deletion activity.
13. Lastly, choose Delete Video for completing the procedure.
14. The method of removing a video of YouTube by the help of phone application
15. Firstly, you go to the YouTube application.
16. Then, sign in to the Google ID, if required.
17. After that, press on the Library. It shall be towards the end at the right-hand side of the display.
18. Next, click on My Videos.
19. Then, click on the three vertical dots. It shall be after the video that you want to remove.
20. After that, press on Delete.
21. Next, press OK for completing the procedure.
22. The method of hiding videos by the Android or iOS YouTube application
23. Firstly, go to the display having a list of the earlier uploaded YouTube videos.
24. Then, press on the three vertical dots. It shall be after the videos that you want to hide.
25. As soon as the popup menu gets displayed on the screen, press on Edit option.
26. Next, click on the option present in the Privacy part.
27. Lastly, for hiding the video from anyone except yourself, press on Private. And for hiding the video from anyone leaving those who the video’s straight link, click Unlisted.
28. The method of hiding videos by browser 
29. Firstly, go to the display having a list of earlier uploaded YouTube videos.
30. Then, choose the option present in the Visibility column.
31. After that, three options shall get displayed on the screen.
32. Next, for hiding the video from anyone but yourself, choose Private. For hiding the video from everyone except audience who are having the video’s straight link or complete URL, choose Unlisted.

Source :- http://www-office.uk/how-to-delete-a-youtube-video/

Kellie Minton is a qualified IT engineer by education. After working in the IT sector for a decade, she began writing about it two years ago. She loves to write about emerging technology like office.com/setup.

Fortunately, the process of launching an app on a Windows computer as well as launching an app on a Mac device is quite similar. In both of them, you just need to press or else double click the app’s symbol. The tough thing is to find where apps are kept on the Mac device and finding out where the respective app launchers are put and the method of using them.

Not just Mac but also Windows makes this process easy of searching and running of apps with a direct user interface i.e., the Start menu in Windows whereas the Dock on the Mac device.

Here’s how you can launch apps on your Mac device

• Pinning apps

In Windows, it is one of the methods by which you can include most-visited apps to the Start menu. Whereas on the Mac device, you shall be able to include an app to Dock by moving its symbol to anywhere you wish to have the Dock to get displayed. Then, you can start the app by pressing on the Symbol.

However, unpinning implies deleting it from the preferred place in the menu.

Go through the given below steps carefully.

1. Firstly, press the combination of Ctrl+Click or else do a right-click on the symbol of the app you want to take out from the Dock.
2. Then, go to the displayed menu and press on Options.
3. After that, tap on Remove from Dock.
4. Most used apps

Have a look at the below-mentioned points.

1. Firstly, press on the Apple menu and then press on Recent Items.
2. Then, choose the item that you want to access from the given list.
3. Programs Files Directory
4. For accessing the Applications folder, visit the Finder by pressing the Finder symbol in the Dock.
5. Then, go to the Finder’s Go menu and choose Applications.
6. Note that you’ll be able to view a Finder window.
7. Over here, you shall go through the list of installed applications, view an application by double-clicking on its symbol or else move an app’s symbol to the Dock.
8. If you wish to have the application’s symbol in the Dock, then you need to go through the given below steps.
9. When the app is open, press the combination of Ctrl+Click or else right-click its symbol in the Dock.
10. Then, you need to press on Options.
11. After that, click on Keep in Dock.

Source :- http://ennorton.uk/how-to-launch-applications-on-mac/

Kellie Minton  is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Many of the iPhone users want to know how they can pair up their iPhone with their car stereo or music system. Users wish to do this mainly for listening to their favorite tracks and music while driving. Pairing up your iPhone is as easy as it sounds. Besides, if you are one of the iPhone users who does not know how to pair up your iPhone with your car’s music system, then you have come to the right. Simply, go through the steps I have mentioned in this article to do this in no time.

Here‘s how to pair your iPhone via Bluetooth

Besides using an aux cable or anything to connect your iPhone with your car’s stereo, Bluetooth is always the best option you have to do this task. By connecting your car’s stereo Bluetooth with you iPhone, you can do everything, whether it is listening to your favorite songs in your car or getting Google Maps voice directions. Now, follow the steps mentioned below to do it in no time.

Step 1. Making your iPhone Discoverable

It is a first step that you will follow to make your iPhone discoverable by activating its Bluetooth. It will enable your car’s stereo to find your iPhone’s Bluetooth and to do so, follow the guidelines below:

• Unlock your iPhone to access the Control center to activate your iPhone’s Bluetooth.
• Open up the Bluetooth option on your iPhone and slide it to the to activate it.

Step 2. Setting your car’s Bluetooth to pairing mode

It is the second thing you will do to set your car’s Bluetooth to pairing mode. To do so, follow the guidelines below:

• At first, put your car in On mode to activate its music system or stereo.
• Keep pressing the Source button till it puts the music system on Bluetooth.
• Pairing mode will be automatically activated when you put your car’s music system on Bluetooth mode.

Step 3. Pair both of the Bluetooth with each other

After activating Bluetooth on your iPhone and in your car, the next thing you will do to pair them up with each other. To pair up both of the Bluetooth with each other, follow the guidelines listed below:

• At first, access Bluetooth tab available in Settings on your iPhone.
• Inside the Bluetooth tab, tap on Other Devices menu.
• Find the Bluetooth of your car from the available options inside the Bluetooth tab.
• It’s not obvious that your car’s Bluetooth available in its name so choose the Bluetooth of your car carefully.
• Tap on your Car’s Bluetooth when you know it’s it.
• The moment you tap on your car’s Bluetooth name, tap on Pair option when it appears, and both of the Bluetooth will be paired successfully.
• Now, play your favorite tracks on your iPhone to listen to it with your car’s music system.

Source :- http://1norton.uk/how-to-pair-an-iphone-with-your-car-via-bluetooth/

Kellie Minton  is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Many of the Windows users often face an error message code 9c48 on their Windows PC screen whenever they try to install a specific update. The error code prevents these affected users from installing an update on their Windows PC or laptop. The error code 9c48 has been confirmed not only on Windows 10 but also on its 7 and 8.1 version. Majority of users are reporting that this issue mainly occurs when updating Internet Explorer and Edge. If you are amongst those users who are facing the same issue on your Windows PC or laptop, then you have come to the right place. Here I have mentioned some of the best and effective methods to fix this issue in no time.

By running the Windows Update Troubleshooter

It is one of the best and most effective solutions you have to resolve this issue on your Windows PC. Windows Update Troubleshooter is a built-in utility that has been provided by Microsoft to its users. Windows Update Troubleshooter has the capability of fixing this issue in no time. Follow the steps below to run the Windows Update Troubleshooter on your PC:

• Press Windows Key + R to open up the Run dialog box.
• Type ‘ms-settings: troubleshoot’ in the search bar and click on OK.
• After the opening of the Troubleshooting tab from the Settings, locate ‘Get up and Running’ section available at the right side of the screen.
• Click on the Windows Update button and then click on Run The Troubleshooter from a newly appeared window.
• Now, wait until the utility stops running and do not close any window till it finishes.
• After the scan has been completed, it will recommend some suitable strategies.
• Click on Apply this fix option in a newly appeared box.
• Follow the manual instructions if there are available any.
• After applying the strategy, restart your PC, and you are good to go.

By uninstalling third-party antivirus

It may sound strange to some users out there, but third-party antivirus often causes such error messages on your PC. If it’s the scenario, then follow the steps below to uninstall that third-party antivirus on your Windows PC:

• At first, press Windows Key + R to open up the Run dialog box.
• Type My Computer in it and click on OK.
• Inside My Computer section, click on the Uninstall or Change a Program option available at the upper center of the screen.
• Choose the antivirus from the list and right-click on it.
• Click on Uninstall and wait till the process is over.
• Restart your PC, and you are good to go.

Source :- http://www-office.uk/how-to-fix-windows-update-error-code-9c48/

Kellie Minton is a qualified IT engineer by education. After working in the IT sector for a decade, she began writing about it two years ago. She loves to write about emerging technology like office.com/setup.