The

Best

Add Zone For You

SITE123 - Website Builder

marierobert8168's blog

Star wars is among the most well-acclaimed and world-renowned movie franchises of all time. The American space-based franchise has added nine installments under its name and is set to release another one. Star Wars is not merely a film franchise; the flick has gone on to become an international phenomenon.


Whatever the industry be, Star Wars have already capitalized on it. It may be character figurines, animated series, Blu-rays, video-games, or a live-adaptation series; Star Wars have it all. The original addition to the space saga started way back in 1977, and its most recent installment was released in 2017.


 The movie is looked forward globally by the die-hard fans, and the reason is simple, the film will put an end to the sequel trilogy and the Skywalker storyline altogether. Lucasfilm is utilizing what has been their marketing strategy for all these years, and this seems to be working yet again. The hype for the flick is reaching new heights as its release date comes closer.


Disney took a page off of Avengers playbook and held the title unrevealed until April. It was finally revealed at the Celebration Chicago, and the fans loved it. The studio does not intend to stop here as the fans wait and theorize about the December releasing movie.


We recently received a significant release of tie-in products, a cover story containing new images, and a bit of detail as well. However, what the fans really wanted was footage, and we received it recently as well. The final trailer for Rise of Skywalker was released by Lucasfilm recently, along with a brand new poster.

The footage was the longest out of every trailer, but it took the same approach as its predecessor and kept the plot details to a minimum. The video consisted of vague yet intriguing dialogues from the main four characters. It featured some out-of-context shots and scenarios, as well.


The nature of the mission is still unknown alongside the returning villain. The viewers have no idea about Emperor Palpatine’s plan either, and the speculations are rapidly surging. The studio is being reasonably cautious as we only saw the physical appearance of the villain at the end of the trailer.


We cannot hype the movie more than it already has, and the trailer reassured the fans to expect some iconic moments from the upcoming flick. Disney is going full-throttle this year, with Endgame and now wrapping up the Skywalker Saga. The previous solo addition stumbled a bit on the box office; however, we can be confident that it is back in its full form.


Source url:- https://williamsblogpoint.wordpress.com/2019/10/24/star-wars-the-rise-of-skywalker-the-final-trailer-released/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate

Google has been rocking the industry with the latest operating system Android 10 alongside the release of flagships such s Pixel 4 and Pixel 4 XL. The devices came with the newest OS, which was later made available for the company’s older Pixel flagships.

Now more android devices are expected to come with Android 10. The official name for the OS was recently announced to be Android Q. Google continued its dessert naming pattern with Android Q as well, and the OS brought in a load of new functions and features.

The first beta for Android Q was released way back in March, and the results have been positive for the most part. Features such as enhanced privacy settings, full system navigation, Live caption, and Bubbles notification are just the tip of the iceberg.

Here are the best 7 Android 10 features you need to use on your Pixel 4

1- App removal can be undone now

If you have been using Android for a long time, then you must be guilty of accidentally removing an app. It is hard already to maintain the functions, but remembering all the shortcut icons on the home screen is even tougher.

So if you are sitting and scratching your head as to what app was removed from the home screen, then do not worry, we will help you figure it out. Android Q allows you to undo the app removal for a few seconds. The undo icon will appear on the bottom of your home screen. Tap on it and Viola; the app is back where it was.

2- Wi-FI QR Codes

Now you do not have to ask your friends for their Wi-Fi passwords. This does not mean that you do not need to have their consent, just that you would not have to type in the password to connect. Simply scans the QR code generated by the person and get connected immediately. To do so:

  • Open the Settings tab.
  • Locate Wi-Fi settings.
  • Choose a home network.
  • Now tap on the QR code above it.

3- Bubbles

If you have ever used Facebook Messenger, then you may be aware of the bubble notification feature. You know the small pop-up circle that could be placed on any part of the screen. You should only allow important apps to use Bubbles notifications, as a bunch of hovering notifications on your screen could create a mess.

4- Privacy Settings Tab

Now you get a dedicated Privacy section under the settings tab. If you open it, then you will be able to see the permissions you have allowed for the apps. It can vary from microphone, camera, location, contacts, and calendar.  With the newly added section, you can easily keep up and revoke the permissions for any app you deem unnecessary.

5- Location Control

Now you will be able to get an enhanced location control on your Android Q. Previously, you can only let any app gain location access every time or not at all. However, Android Q offers an option that enables you to access the location data only during app usage. It helps save battery life while enhances privacy as well.

6- Live Caption

Google has modified the Live Caption to make your devices more accessible than before. Currently, the feature is only available on the Pixel 4 series, but Goggle intends to release it for other Pixel devices as well. You can put live caption of any playing video without any internet connection.

  • Play any video and press the volume keys.
  • You will get a caption option at the bottom of the volume slider.
  • Tap on the option.
  • The caption can be dragged anywhere on the screen.

7- Modified Notifications Controls

Now you receive two options when you long-hold on an alert. You can either use Silent or Alerting. In case you opt Alerting, then the app will make notification with every new alert. However, choosing Silent would restrict the app from making any further sound. To avail the feature:

  • Launch the Settings tab.
  • Go to Apps and Notifications.
  • Locate and press Notifications.

All the features can improve your device accessibility while improving the user experience as well.

Source url:- https://williamsblogpoint.wordpress.com/2019/10/24/7-best-android-10-features-to-use-on-pixel-4/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate.

To make form filling quicker, Google Chrome allows users to save the data. You shall get the option for letting the browser save the sign-in credentials, numbers, etc. Many users like this feature, but there are some who prefer not to use it. It might lead to the leakage of private data. If you don’t want your web browser to save your data, then go through this blog carefully.

Here’s is the way of disabling the Autofill in Chrome

  • By using Settings

The method of disabling the Autofill in Chrome has been given. Follow the given below points properly for knowing the same.

  1. Firstly, launch Chrome.
  2. After that, press the Settings symbol. It will be located on the upper right-hand side. 
  3. Next, go to the menu.
  4. Then, press on Settings.
  5. After that, move downwards till you find the Autofill part.
  6. Then, press on Addresses and More.
  7. Push the toggle immediate after the option stating ‘Save and fill addresses’ for disabling it.
  8. The method of removing Autofill entries in Chrome

Go through the below-mentioned steps nicely.

  1. Firstly, launch Chrome.
  2. Next, visit the upper right-hand side. Press the Settings symbol.
  3. After that, press on Settings.
  4. Then, go downwards till you find the Autofill part.
  5. Next, press on Addresses and More.
  6. Note that if you wish to clear any saved address, press the Options symbol. It will be located near the entry.
  7. Lastly, choose Remove. It will be located in the context menu.
  8. Use the Clear Browsing Data part

Have a look at the below-mentioned instructions.

  1. Firstly, go to Chrome.
  2. After that, press on the Settings symbol.
  3. Next, choose settings. It will be located in the menu.
  4. Then, press on Advanced for revealing further options.
  5. After that, visit the ‘Privacy and Security’ part.
  6. Next, choose Clear Browsing Data.
  7. Then, ensure that you are on the Advanced option.
  8. Choose Autofill Form Data. You shall even choose the remaining information that you wish to remove.
  9. Lastly, tap on Clear Data.
  10. For additional knowledge: edit Autofill entries

Follow the below-mentioned points:

  1. Firstly, visit Chrome.
  2. After that, press on the Settings option.
  3. Next, choose Settings.
  4. Then, visit the Autofill part.
  5. After that, press on the Addresses and More.
  6. Next, press the Options symbol that has been placed near the entry.
  7. Lastly, choose Edit. It will be located in the menu.

Congratulations! You have been able to turn off form Autofill in Google Chrome with the help of this blog.

Source url:- https://williamsblogpoint.wordpress.com/2019/10/23/how-to-turn-off-form-autofill-in-chrome/

Ava Williams is a creative person who has been writing blogs and articles about security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

Choose the best backup software for the smartphone

Backing up your smartphone is a good practice. Fortunately, few of the backups are more detailed than the others. Note that Titanium Backup is among the best ways of backing stuff up. Read on and learn how to use it.

  • Is there a need to get Titanium Backup Pro?

Usually, regular people do not go for such a robust tool. For installing and using Titanium, people need to have a technical field knowledge.

  • Disadvantages of the Titanium

For using Titanium, you require a device which supports memory card. Not only that, but also an SD carded having minimum space as much as your smartphone.

You need to ensure that you have downloaded the free version of Titanium Backup.

You also have to get the key from the Google App Store.

Requirements

You must have an Android device that needs to be rooted. This means that you need super user permissions. You also need to install the superuser app.

The method of backing up and rooting the smartphone before going for Titanium backup

  1. Firstly, turn on backup on Google Drive.
  2. Then, press on Settings.
  3. After that, click on System.
  4. Next, click on Backup.
  5. Then, tap on Google Backup.
  6. You need to back up the pictures as well as the rest of the files with the help of Google Photos or any other similar kind of application.
  7. After that, backup the messages by SMS Backup or any other similar tool.
  8. Use an SD card in your phone and run the device’s SD backup tool.
  9. Next, tap on Settings.
  10. Then, click on Backup.
  11. After that, tap on Backup and Restore.
  12. Note: Whichever application that you wish to have, and its files should always be backed up on your memory card.
  13. Then, you shall require rooting the device.
  14. As soon as it is over, you need to restore the backups by activating the application or else using a file explorer application so that you can get back your items from the memory card.
  15. The method of restoring the Android backup
  16. Firstly, go to Titanium Backup.
  17. Then, click the Backup/Restore option.
  18. After that, click on Menu.
  19. Next, click on the Batch.
  20. Then, click on Restore All Missing Apps as well as System Data.
  21. Lastly, you need to reboot the Android smartphone of yours.

Congratulations! You have been able to use Titanium Backup Pro with the help of this blog.

Source url:- https://williamsblogpoint.wordpress.com/2019/10/23/how-to-use-titanium-backup-pro/

Ava Williams is a creative person who has been writing blogs and articles about cyber security. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs and websites.

Flash Player not functioning correctly on Google Chrome, is among the most common problem faced by users worldwide. This restricts them from playing games, videos, and animations on Chrome. The issue is a common one and has some quick workarounds as well. So, here are the steps to fix the Flash player in Google Chrome.

Fixing Flash Player not Appearing in Google Chrome

  • First of all, you have to launch Google Chrome on your device.
  • Then you should choose the ellipsis menu icon on the top right-hand side of the Google Chrome menu.
  • You have to click on Settings to open the settings page.
  • Thereafter you should click on Advanced at the end of the screen.
  • You have to click on “Content Settings” beneath the Privacy & Security section.
  • Go to the Flash option.
  • Later, make sure that “Ask first (recommended) option is toggled to enable.
  • Now, you have to reboot the browser.

Fixing Flash not Working on a Secured Website

  • Get started by going to the website.
  • Then you should click on the Lock on the bottom left of the URL bar. The menu shall come with many choices and details, containing a Flash field.
  • You have to click on the Flash dropdown section and choose Allow.
  • After that, exit the screen. A message expressing, “To apply your updated settings to this site, reload this page” will come. Choose Reload.
  • Now, you have to wait to refresh the page.
  • After refreshing the page, Flash will get turned on.

Fixing Flash Errors in Google Chrome

  • To get started, launch the Google Chrome on your device.
  • Then you should go to the address bar and enter or copy & paste “chrome://components” in it.
  • Thereafter hit on Enter key.
  • You should locate “Adobe Flash Player.”
  • Select “Check for Update.” 
  • When the update is available, click on Update Now.
  • Open the content that you were attempting to hear or see and then reload the webpage. In case it still does not function, proceed with the troubleshooting.
  • After that, click on the vertical ellipsis menu icon on the top right-hand side of the screen.
  • Then you should choose “Update Google Chrome” if it appears in the listed menu.
  • When the Google Chrome updating process is finished, click on Relaunch.
  • You have to reach the content you were attempting to hear or see and then refresh the webpage. In case it still does not function, proceed with the troubleshooting.
  • Navigate to the “www.adobe.com/go/chrome.”
  • You should choose the computer’s operating system.
  • Choose the PPAPI option.
  • Now, you have to untick the boxes for whichever default software that you do not wish to install. Click on “Download Now” to reinstall Flash.

Flash Plug-in Malfunctioning

  • First, you have to choose the vertical ellipsis menu icon on the top right-hand side of the screen.
  • Then you should choose the More Tools option.
  • Go to the Task Manager.
  • You have to choose “Plug-In: Shockwave Flash.
  • Choose “End Process.”
  • Thereafter exit the Task Manager screen.
  • Now, you should reach the content you were attempting to see or listen to and refresh the page.

Source url:- https://williamsblogpoint.wordpress.com/2019/10/22/how-to-fix-chrome-flash-not-working/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate

The function of laptops to remember a recognized network is convenient; however, there are instances when you wish to forget the networks for whatever reasons. In case you are unable to do the same with your home or office network, then you have come to the right place. So, here are the instructions to forget a network on MacBook.

Forgetting Network on a MacBook

  • First of all, you have to go to the Apple Menu in the top left-hand side of the display.
  • Navigate to the new screen, and then click on Network.
  • Then you should select the Advanced option in the bottom right-hand side of the screen.
  • You should go to the list and choose the network you would like to forget.
  • After that, navigate to the (-) icon beneath the list to delete it from the stored networks.
  • You have to verify the actions by selecting Remove then OK on the confirmation screen.
  • To apply the changes, click on the Apply option in the bottom right-hand side of the screen.
  • You can choose many networks by pressing Command.
  • To select all networks, hold the Command + A keys.

Here is an Option to Get to the Preference Menu:

  • Go to the Wi-Fi status menu on the top right-hand side of the window.
  • After that, you should select “Open Network Preferences” beneath the all Wi-Fi network list.
  • Now, select the Advanced option in the bottom right-hand side of the screen to open the networks list then go with the guide over to forget networks.

Set Wi-Fi Priority on MacBook, Go with the Next Instructions:

  • To get started, select the Apple Menu in the top left-hand side of the window.
  • Then you should choose the Systems Preferences.
  • Go to the pop-up window and click on Network.
  • Navigate to the Advanced option on the bottom side of the screen.
  • You have to move and place these networks in the sequence you want them to connect.
  • After that, verify the actions by selecting OK.
  • To apply your changes, click on the Apply button on the bottom right-hand side of the screen.

Processing Wi-Fi Diagnostics

  • First, you have to close all applications and connect to the Wi-Fi.
  • Then you should long-press the Option key and select the “Wi-Fi status menu on the top right-hand side of the window.
  • Go to the list and select “Open Wireless Diagnostics.”
  • Thereafter you may need to type your administration pin.
  • The MacBook will begin analyzing the wireless environment automatically.
  • If you would like to check any issues with the connection, then go to “Continue to summary” and select Continue.
  • Now, do not exit the screen before the MacBook has completed monitoring the wireless connection.

Be Safe when Connecting to Public Wi-Fi 

  • First and foremost, navigate to the Apple Menu on your MacBook.
  • Then you should select System Preferences.
  • Go to Sharing.
  • You have to unselect the options given.
  • After that, navigate to the Finder.
  • Then go to the AirDrop.
  • Navigate to the end of the screen, choose “No one” for “Allow me to be discovered.”
  • Later, navigate to the System Settings on the iOS device.
  • Select the General option.
  • Choose the AirDrop option.
  • Now, select the Receiving Off option.

Source url:-https://williamsblogpoint.wordpress.com/2019/10/22/how-to-forget-a-network-on-macbook/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate.

Want to get some beneficial information regarding transferring files between your GoPro and Mac? In this article, you are going to learn how to pair both devices and copy files from your action camera to Mac. Transferring data to your Mac is very important since if you do this, then your files will remain safe, and you will be able to free up space on your camera. By doing so, you can shoot more photos and videos on your camera on the next trip. 

There a few methods which enable you to transfer your files between both devices flawlessly. So what’s the wait let’s consider each technique one by one. 

Method 1: SD Card Reader

The best and straightforward way to copy files between Mac and the GoPro is by reading the SD card in your Mac. You can use an SD card reader to connect your GoPro SD card to your Mac. If your Mac only has USB C ports, then you will have to buy an SD card reader, which has a male USB C connector plug. If the Mac uses only USB C ports, then we will recommend you “UGREEN USB C SD Card Reader,” which is available online on Amazon. Here’s how to transfer files from GoPro to your Mac via SD Card reader: 

  1. Eject the lower lid of your GoPro to get the SD card out of it. 
  2. Now press the SD card a bit to pop it out from the camera. 
  3. Place the micro SD card into the card reader. 
  4. Insert the card reader into the Mac’s USB port. Make sure that your computer is already turned on. 
  5. Head to the Finder application on your Mac. 
  6. Click on the untitled option located on the left side menu. If the name of your SD card appears there, then click on that. 
  7. Go to the DCIM folder and then open the “101GOPRO” folder situated under DCIM. 
  8. To open any file on your Mac, double-tap on it. If you want to get options for the files such as copy, cut, and other, then right-click on any file. To select multiple files, hold down the Command key on your keyboard and then select the files that you want to copy. 
  9. You can also copy the whole folder to save all files on your Mac. 
  10. Once you have pressed the Copy option, go to the destination directory where you want to save those files. 
  11. Now right-click and then choose the Paste option. 
  12. The copying process will start shortly just after pressing the paste button.  
  13. Once you have transferee all files successfully to your Mac, you can navigate to the safely eject command on your Mac before pulling out the SD card. 

How to Connect GoPro to Your Mac via USB C? 

 Do you know that your Mac possesses a small program to read the GoPro type devices? This program is known as Image Capture. In order to get this method done, get a USB C cable. Here’s how to transfer files on GoPro to Mac with a USB C cable:

  1. Take the USB C cable and then plug it into your favorite action camera. Now connect the other end of the cable into the USB port of your Mac. 
  2. Switch on your GoPro Camera. 
  3. Go to the “Launchpad” icon on your Mac, and it is located in the dock of your Mac’s home screen. 
  4. Now type “image” in the search bar and then choose the Image Capture option. 
  5. Select your GoPro from the left side menu. 
  6. Choose a folder that contains your images and then click on the Import To option to choose a destination folder. Press the Import all option. 
  7. Let the importing process complete. 
  8. Now you can close the Image capture window. Once that done, safely unplug the GoPro from your Mac. 

Source url:-https://williamsblogpoint.wordpress.com/2019/10/18/how-to-connect-gopro-to-your-mac-and-transfer-files/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate.

If you own a Windows 10 PC, then you might have noticed that sometimes your computer restarts all of a sudden for applying updates without your permission. This can be seriously very frustrating since the work you were doing maybe left unsaved and removed. The Windows Update is the worst feature made by Microsoft since there are no options to prevent this. Anytime your device can be restarted no matter while you are playing games, doing some online transactions and other essential work. If you want to get rid of this problem, then there is an ultimate solution for this provided by the Microsoft. The feature is called Active Hours, which allows you to set a specific time for your important work. During that time, your device will not restart for updating Windows without your permission.  

Keep in mind that the system will still reboot for updating Windows, but only when the active hours are not active.

How to Setup Active Hours on Your Windows 10 Device?

There are two basic ways to enable the Active Hours to feature on Windows 10. The first method is to manage Active Hours according to your device usage and activity automatically with the system preferences. The second method is that you can choose the Active Hours for your work manually. Let’s unpack each method one by one. 

Enable Active Hours with Automatic Configuration

  1. Browse Settings on your device. You can do that by simply opening the Start Menu and then just search for the settings in the search bar. 
  2. Once the Settings tab is opened, go to the Update & Security option. 
  3. Go to Windows Update. 
  4. After that, head to the Change active hours option. 
  5. There you have to enable the “Automatically adjust active hours for this device based on activity” option by clicking on the button located beneath it. 

Now the automatic Active Hours are enabled on your device. The system will configure how often you are using your device and then will tweak the Active Hours according to your usage. The system may take some time to learn your device usage, and then the Active Hours will be set for that period. 

How to Manually Tweak the Active Hours in Windows 10? 

To set up the Active Hours on your device manually, follow the instructions mentioned below: 

  1. Go to Settings. 
  2. Now head to the Update & Security option. 
  3. Press the Windows Update option. 
  4. Navigate to the “Change active hours” option. 
  5. Firstly, press the toggle button located beneath the “Automatically adjust active hours for this device hours for this device based on activity” option. 
  6. Then, head to the “Change” link. 
  7. Now pick the “Active hours” timings according to your choice. First, set the Start Time and then select the End time (note: you can’t choose more than 18 hours of active hours). 
  8. Now press the Save button to apply changes. 

Now the device will not receive any Windows update related prompts and restarts during the Active Hours. This is one of the best offerings by Windows 10. 

How to Reschedule the Automatic Restart on Windows 10? 

If you want to schedule the Window Update restart during the non-active hours, then use the instructions mentioned here:

  1. Head to the Settings. 
  2. Press the Update & Security. 
  3. Navigate to the Windows Update. 
  4. Tap the “Schedule the restart” link. (Note: This link will be only visible when a restart is pending by Windows Update on your Windows 10 computer.)
  5. In the “Schedule a time” option, enable the option by pressing the toggle button. 
  6. Set a time to schedule the restart for up to 5 days in the future. 

That is it! Now the device will not reboot before the scheduled time. 

Source url:-https://wwwmcafeeactivate.uk.com/how-to-setup-or-change-windows-10-active-hours/

Ava Williams is a creative person who has been writing blogs and articles about security. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.

Suicide Squad is set to come back with a sequel, and new pics from the set have been revealed that features most of the cast in their costumes. After a couple of years of wait, the roaster for Suicide Squad 2 picked up instant heat after James Gunn was added to the franchise. The flick is neither stated to be a sequel nor a reboot. However, the cast assembled by James hints at a film close to the baseline of DCEU.

The fan-beloved Harley Quinn, played by Margot Robbie, will be coming back to the cast alongside Captain Boomerang, played by Jai Courtney. Joel Kinnaman as Rick Flag and Viola Davis as Amanda Waller will be reprising their respective roles as well. Other than the original cast, James has managed to add some big names as well. Idris Elba and John Cena are among the most significant additions to the cast.

The whole cast included many big names like Alice Braga, Steve Agee, Storm Reid, and Mayling Ng. Recently the cast was seen in their DC suits. The first set photos showcase new characters that are most likely to end up dead in the movie. The only returning member who is a part of the group is Captain Boomerang, and he is spotted in a slightly different costume. The pics showcase the first looks of Pete Davidson, Flula Borg, Nathan Fillion, and Mayling Ng. Sean Gunn can also be seen in his mocap suit, which indicates he will be playing a complete CGI character.

James seems to have tampered down the big fur coat of Captain Boomerang, and a sash around the torso seems like the most noticeable addition. The sash appears to hold the deadly boomerangs that are the trademark for the character. The pics provide us a good idea about which role the actors will be playing. The probable characters are:

  • Arm-Fall-Off-Boy, who is able to detach his limbs by choice, maybe played by Fillion.
  • Fillion might even play Blackguard, who can produce weaponry via pure energy.
  • Davidson may play Savant, who is a skilled hand-to-hand fighter.
  • Borg can play Javelin who uses a giant javelin.
  • Mongal, who is an overpowered alien, might be portrayed by Maling NG.

Even though there has not been any information about James’s character, the rumors indicate him playing the role of Weasel.

The pics might not be official; however, they still give us the first look at how The Suicide Squad is going to look under the command of James Gunn. The photos seem like a reminder of the statement “do not get too attached” that was released with the casting announcement. The cast may be an early version of The Suicide Squad that will fail on a mission, which will result in the majority of them dying. This will undoubtedly push Waller to bring back the replacements for them.

Now that we have received the first taste of new looks for the cast, the fans are eager to get an official look as well. Even though James has teased us that it will not be the case, these leaks may change his perspective.

Source url:-https://williamsblogpoint.wordpress.com/2019/10/17/suicide-squad-2-set-pics-reveal-cast-in-costumes/

Ava Williams is a creative person who has been writing blogs and articles about cyber security. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs and websites.

Disney Plus is set to release in the US and Canada coming November, and amidst all the hassle a rumor regarding Liv Tyler returning as Betty Ross has surfaced. The upcoming streaming service is bringing several MCU character-based TV series, and She-Hulk is one of them. The support characters like Falcon and Scarlet Witch are getting projects solely focusing them, and Disney intends to keep it going with She-Hulk.

Disney is also attempting to bring back some lesser utilized characters via the streaming service. Shanon Carter, played by Emily VanCamp, is returning for The Falcon and the Winter Soldier, whereas WandaVision is set to showcase Jimmy Woo by Randall Park alongside Darcy Lewis by Kat Denning. The latter has not featured in MCU ever since Thor: The Dark World released in 2013. Luckily, the forthcoming TV series is bringing back one of MCU’s forgotten and original characters.

The rumor surrounding Liv returning in the MCU surfaced because of Daniel Richtman’s patreon. The show is rumored to showcase William Hurt back in the role of Thunderbolt Ross. William appeared in Black Widow, and his daughter may return as well. Liv already has had an appearance in the MCU as Betty in The Incredible Hulk. Although all of this is merely a rumor as of now, and have not been confirmed by either Disney or Marvel.

However, if Liv does return as Betty in She-Hulk, then it would be her first MCU appearance in 13 years, even that if She-Hulk has a 2021 release. If we speak realistically, then her return would not happen until 2022. So, it is difficult to tell how many changes have occurred in Betty ever since 2008. Betty had a relationship with Bruce Banner when he was played by Edward Norton, not Mark Ruffalo. However, MCU has not mentioned anything regarding that relationship even once. Instead, Bruce managed to find an intriguing love interest in the form of Black Widow.

Nonetheless, entertaining the idea of Liv returning as Betty Ross seems refreshing this early on. It is possible that Jennifer could look for Betty. However, reverse Betty looking for Jennifer is possible, as well. While there is little to no idea of what Betty has been up to in the last decade or so, it is quite possible that her gamma radiation research turned her into She-Hulk. This can open the possibility of Mark and Tyler sharing the screen, as the latter can make an appearance as Smart Hulk.

A solo Hulk flick is nowhere in sight, but the possibility of Tyler returning in She-Hulk could be the part of MCU’s long-term plans. This can open a new realm of possibilities for future MCU films; however, the information being a rumor could ruin the fun for everyone. There is no harm in hoping, and that is what the fans are doing.

Source url:-https://williamsblogpoint.wordpress.com/2019/10/17/she-hulk-tv-series-liv-tyler-may-return-as-betty-ross/

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as mcafee.com/activate

Pages: 1 2 »

Sujay Bhaattacharjee The Man Behind Senstional Design

Alexa Rank 299000

google ranking checker

Website Page View Hit

Sales

Manager