The

Best

Add Zone For You

SITE123 - Website Builder

mia01's blog

Nintendo is among the most well-recognized names around the world when it comes to gaming consoles in general. The Japanese giant was founded way-way back in 1889 and had been providing world-class gaming experience to players all over the globe ever since the 1970s. With several iconic names like Pokémon, Mario, and The Legend of Zelda under its belt, the multinational behemoth is still going strong.

Wii is a home gaming console by Nintendo and has been around ever since its release in November 2006. Wii packs decent games, a durable built, and a family-friendly approach, due to which the relatively old console is still functioning well. Even with so many functions and Nintendo backing it up, you can encounter issues with it.

One of the most common and frustrating issues you can encounter is the Wii remote, not functioning. As the console heavily relies on the remotes, losing their functionality could result in a compromised gaming experience. Luckily, there are some quick workarounds to fix the issue.

Wii utilizes infrared controllers for the games, and they come with a convenient wrist strap. This has saved games from several accidents and TV sets in their lifetime. The controllers are sturdily built and offer optimized performance; however, they can get out of sync at times. In case you are encountering any such problem, then follow the mentioned steps and get through it.

5 Tips to fix Wii Won’t Sync Issues

You can opt to apply the mentioned steps if your Wii remote has stopped functioning. Here are some handy tips:

  1. Wii Reboot

Rebooting is probably the most used and surprisingly effective workaround for any technical issue. It may be a PC, mobile device, or any consumer product, rebooting them could fix most general issues. Turn off your Wii via the mains and leave it like that for 30 seconds. If the remote syncs, then congrats, otherwise you need to proceed with the tips.

  • Remote Re-Sync

Wii remotes are wireless, so Nintendo builds them in a way that they would re-sync in case they lose connections. The process to re-establish the network is straightforward and it takes less than a few minutes. So here is how you can do it:

  • First, you need to reboot your Wii.
  • Reach the Health and Safety warning.
  • Open the SD card slot from the face of Wii.
  • Tap and hold down the red Sync key for 15 seconds.
  • To ensure a better connection, the battery cover of the Wii remote should be removed.
  • Tap the red Sync key on the remote.
  • Again tap the Sync key on the console.
  • Wait until the two pair up.
  • Repeat the third and fourth steps for other remotes as well.

Note: After syncing one of the remotes, you need to quickly move on to the next one as the Sync window may run out of processing time. You can see on the LED of the remote to keep up with the pairing process.

  • Batteries

The Wii remotes make use of cells to function. So in case you cannot see any lights or are unable to pair them, then replace the batteries. You will need two AA batteries for every remote. The batteries for your remotes should last up to 25 hours if used as pointers and 60 hours with regular use.

  • Remote Replacement or Repair

If the above steps do not work, then you may need to replace the remote as well. The remotes have a limited lifetime, no matter how delicately they are used. Buy a new one or try borrowing one from your friends first to ensure that it is the remotes that are at fault. Sync them using the steps mentioned above.

  • Wii Replacement or Repair

In case more than one remote is not syncing with Wii, then there is a chance that Wii may be at fault. Try syncing the remotes with any other Wii, and if they work, then you know what to do. You can get your Wii repaired at Nintendo repair centers or get a new Wii online.

SOURCE:-  https://medium.com/@davismia9999/how-to-fix-wii-remotes-not-syncing-issue-456e983020db

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet, utility software and new media. She writes for McAfee products at  mcafee.com/activate.

Acestream is among the most well-known streaming platforms that lets you watch sports channels via Android devices and PC.  The service is free of cost, and not even a user account is needed to stream mainstream sports channels like Sky Sports, ESPN, etc. This peer-to-peer streaming protocol makes use of BitTorrent and is used for streaming video feeds. If you need a secure way to stream your favorite spots tourneys, then you know AceStream is your best bet. So, here are the steps to find the working links for AceStream.

Install AceStream on Windows

If you want to install Acestream on Windows, then you need to follow the instructions given below.

  • First of all, you should download the Ace Player HD application.
  • Then you have to install the application on the PC.
  • The next action permits you to test the software first. Tick the box if you would like to skip the step.
  • You should open the Ace Player on the PC.
  • Thereafter you have to choose “Open Ace Stream Content ID” & copy a link of the channel you would like to see into the application.
  • Now, go to the “Play” option to begin the stream.

Install AceStream on Android Device

You need to install Acestream on your Android device, follow the steps mentioned below.

  • Get started by going to the Play Store on your device.
  • Then you should go to the search bar.
  • You have to type the “Ace Player HD” application into the search bar.
  • Thereafter select the app & download it from the results.
  • You should open the application.
  • Go to the menu icon in the upper right-hand side of the screen & select “Enter Content ID.”
  • Now, you have to paste the link of the channel you would like to see & choose “Open.”

Install AceStream on MacBook

If you want to install Acestream on MacBook, then you need to follow the instructions given below.

  • To begin with, download & install Soda Player.
  • Then you should copy & paste the player to the “Applications Folder.”
  • You have to go to Soda Player & paste the link of the channel you would like to see.
  • Now, enjoy the stream.

Stream Links via Kodi

You need to stream links via Kodi, follow the steps mentioned below.

  • First, you have to open Kodi.
  • Then you should go to Settings.
  • Navigate to the File Manager.
  • Go to the “Add Source.”
  • Thereafter you should choose “NONE” & paste the following address http://lazykodi.com/.
  • You have to press OK & name the repository “LazyKodi.”
  • Later, back to the main window & choose “Add-ons” & then “Add-on Installer.”
  • You should choose “Install from Zip file,“ & then choose Repositories.
  • After that, select kodil-1.3 zip, & this will be added to the repository.
  • Thereafter you have to go to “Install from Repository,” then “Kodi Repository,” go with the “Program Add-ons,” & finally “Plexus” press “Install.”
  • Back to the main window again & open Plexus.
  • Now, navigate to the box which says “Torrent URL” to begin the stream & paste the link in it.

Source:- https://manage-notron.com/how-to-find-working-links-for-acestream/

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats.Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Microsoft Outlook is an important part of the Microsoft Office, and it lets users manage the personal details. The Gmail IMAP error 78754 on Outlook occurs while trying to access the Gmail account. If you want to fix this issue, then you need to follow the steps mentioned in this article.

Here’s how to fix Gmail IMAP error 78754 on Outlook

  • Enable IMAP and permit less secure apps on Gmail
  1. Launch the Gmail log-in webpage by using your default browser.
  2. Sign in to the Gmail account by entering the important information.
  3. Press on the Gear symbol located on the upper right-hand side of the screen.
  4. Choose the Settings tab.
  5. You will find this option on the pull-down menu.
  6. Change the Forwarding and POP/IMAP option.
  7. After that, choose the Enable IMAP option.
  8. You will find this option near the IMAP access.
  9. Press on the Save Changes option.
  • Creating an App-specific password
  1. Go to the Gmail Log on the webpage on the default web browser.
  2. Sign in to the Gmail account by typing the account information.
  3. After signing in to the Gmail account, go to the Google Security webpage from the default internet browser.
  4. Go to the Signing into Google option.
  5. Press on the App password option.
  6. Verify the log in option once again to move to the next step.
  7. Press on the Select app option.
  8. After that, press on the Other option, which is your custom name.
  9. Enter Outlook in the provided box.
  10. After that, click on the Generate option.
  11. It will create an application password for the device.
  12. Start copying the created 16-digit password.
  13. You need to enter the generated password to log in to the Microsoft Outlook account.
  14. It might be possible that this error will fix this issue.
  15. In case not, then move to the next method.
  • Go through the Microsoft Outlook Configuration
  1. Press on the Start option.
  2. Otherwise, click on the Windows key provided on the system keyboard.
  3. Find Outlook.
  4. Click on the Enter button.
  5. Press on the Advanced options button.
  6. Go through the Let me set up my account manually option.
  7. Press on the Connect option.
  8. Choose the IMAP or POP or Google on any other Windows version.
  9. Make sure that the IMAP or POP access is enabled.
  10. Start using the server details to sign in to the Microsoft Outlook account properly.
  11. After that, type the sign-in information.
  12. Enter the right details.
  13. Press on the Connect option.
  • Update the Microsoft Outlook
  1. Press on the Start option.
  2. Click on the Windows key.
  3. Find the Outlook file.
  4. Press on the Enter option.
  5. Go to the file.
  6. Press on the Office account.
  7. Press on the Update Options button.
  8. Choose the Update Now option by going to the pull-down list.
  9. It will automatically search for a new version.

Source:- http://setupmenow.com/how-to-fix-gmail-imap-error-78754-on-outlook/

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. She writes for Norton security products at norton.com/setup.

Not many know that they can share the link to their favorite podcast episode straight from their iPhone’s Podcasts app. Users can choose where they want to share the episode too. Isn’t this exciting? If you have recently listened to a thrilling podcast and want to share it with your best friend, then read on.

Share a Show in the Library

If you want to share a show in the library, then you need to follow the instructions given below.

  • First of all, you have to open the Podcasts on your device.
  • Then you should select the Library.
  • You have to choose a podcast you would like to share.
  • You should tap on the horizontal ellipsis menu icon.
  • Go to the Share option to show the iOS Share Sheet.
  • Now, locate the action or application you would like to share the show with, & give it a tap.

Share a Particular Episode

You need to share a particular episode, follow the steps mentioned below.

  • Get started by going to the Podcasts on your device.
  • Then you should select the Library.
  • Locate a podcast you would like to share an episode from.
  • Thereafter go to the episode to begin playing it.
  • During it’s playing, see the Now Playing display.
  • Later, you have to go to the horizontal ellipsis menu icon.
  • Now, choose Share Episode.

Share a Show or Episode During Browsing

If you want to share a show or episode during browsing, then you need to follow the instructions given below.

  • To get started, unlock the Podcasts on your device.
  • Then you should go to the Browse option.
  • You have to check out via the featured carousel, or peruse via the Features, Top Charts, All Categories, or Featured Providers sections.
  • Thereafter locate a show & select it to navigate to the show information page.
  • Later, you should select the horizontal ellipsis menu icon.
  • Now, go to the menu section & choose the Share option to comes the iOS Share Sheet.
  • If you want to the individual episode, then go to the Details link.
  • If you are using a device that supports 3D Touch, tap on the episode you would like to share.
  • Now, you have to tap on Share Episode.


Source:- https://medium.com/@davismia9999/how-to-share-episodes-in-podcasts-ad177eb5e2bc

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet, utility software and new media. She writes for McAfee products at  mcafee.com/activate.

There can be plenty of causes behind OneNote notebooks that stop sync. There are high chances of net connectivity issues and gets late while using the same notebook from different gadgets.

Remember! This blog is applicable for OneNote users of Windows 10, OneNote for Office 365, as well as OneNote 2019.

Use the most recent version of OneNote for MS accounts

  1. Firstly, exit from every application.
  2. Then, visit the Start menu.
  3. After that, choose the Microsoft Store.
  4. Next, log into your account.
  5. Then, choose the See more symbol.
  6. After that, select the Downloads and updates.
  7. Next, choose Get updates.
  8. Lastly, you need to close the MS Store.

Use the newest version of OneNote for MS Office accounts

  1. Firstly, launch any of the Office applications like Word, Excel, or PowerPoint.
  2. Then, choose Account.
  3. After that, choose Update Options.
  4. Next, tap on Update Now.
  5. Whenever the ‘Save your work before continuing’ the dialog box gets displayed, you need to save any launch file.
  6. Then, choose Continue.
  7. Next, give some time for Office updates.
  8. Lastly, go to the ‘Updates were installed’ dialog box and choose Close.

Log in to the correct OneNote account

  1. Firstly, launch the OneNote desktop application.
  2. Then, visit the Settings and More menu.
  3. After that, choose Settings.
  4. Next, choose Accounts.
  5. Note that the MS account that you use for logging in to OneNote gets displayed in the account list.
  6. Lastly, choose the Close option.

Set OneNote for automatically syncing notes

  1. Firstly, launch the OneNote desktop application.
  2. Then, visit the Settings and More menu.
  3. After that, choose Settings.
  4. Next, choose Options.
  5. Then, enable the ‘Sync notebooks automatically’ toggle by pushing it.
  6. After that, enable the ‘Sync all files and images’ toggle by pushing it.
  7. Lastly, you need to close the Options pane.

Fix the sync issues whenever a Notebook doesn’t sync

  1. Firstly, go to the OneNote desktop application.
  2. Then, you need to do a right-click on the notebook.
  3. After that, choose Copy Link to Notebook.
  4. Next, go to the web browser.
  5. Then, visit the Address bar.
  6. After that, do the pasting of the link to the notebook.
  7. Next, tap on Enter.
  8. If asked, log in to the MS, work, or school account.
  9. Go to the OneNote desktop application and do a right-click on the notebook.
  10. Then, choose ‘Close This Notebook.’
  11. On the OneNote Online, you need to choose Edit Notebook and, then tap on Edit in Microsoft OneNote.
  12. Lastly, wait for a while and see if the syncing issue is fixed or not.

Source :- https://manage-notron.com/how-to-fix-onenote-sync-error/

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats.Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

People have noticed that some of the times, the iPhone screenshot stops working.

There are different methods by which you can solve the screenshot issue on the iPhone X. I am pretty sure that you’ll get the solution from this blog, so check from the given below ways to get the most appropriate solution for your iPhone.

  • Go for the TunesKit

Congratulations! You have been able to fix your screenshot issues on iPhone X with the help of this blog.

Source:- https://miadavisdotblog.wordpress.com/2019/10/11/how-to-fix-screenshot-issues-on-iphone-x/

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet, utility software and new media. She writes for McAfee products at mcafee activate.

Making videos with your smartphone is trending today. Several apps help you in making amazing videos, and you can add filters, stickers, and much more on your video. YouTubers and social media enthusiasts make most of the videos today, and they usually have the knowledge of editing any video, and they do it according to their preferences in no time. Besides this, there comes an issue of having some unpreferred audio and sound in a video, and users generally prefer removing the Audio, but they do not know how to do it. So if you want to make videos more often, then you have come to the right place. I have mentioned some of the best and effective methods by which you can remove any audio from the video you have just made on your smartphone.

Here’s how to remove Audio from a video with VLC

Many PC users like to edit videos on their PC rather than on their smartphones and tablets. Editing any video on your PC gives you an edge of perfection in the editing of that video, and it cannot be done the same on your phone. There are several programs you can use to edit a video and remove sound from it, but VLC is the ultimate and quite popular and easy to use the program to edit any video. VLC is a media player on your Windows PC, and it is such a savior in editing videos too. To remove Audio from any video with VLC media player on your PC, follow the steps listed below:

  • At first, open VLC on your PC by double clicking on its shortcut on the desktop.
  • Select media.
  • Now, choose Convert/Save and Add option.
  • After clicking on the option mentioned in the previous step, add that video you want to remove the Audio from it.
  • Now, choose Convert from the drop-down menu available at the bottom.
  • After that, click on the spanner icon available next to profile.
  • In there, choose the Audio codec.
  • After that, uncheck the box available near the Audio option.
  • Click on Save.
  • Next, choose a location for the video that is available at the bottom of the convert window.
  • At last, choose start to record that without Audio.

Here’s how to use iMovie to remove the Audio from a video

If you are an iOS user, then you can remove audio from a video by using iMovie. iMovie is quite good for video editing, and it has the capability of removing Audio too. To know how to do it, follow the steps listed below:

  • At first, run the iMovie and choose import movie option available in the center.
  • Next, load the video you want to edit and choose the entire clip.
  • To allow editing, drag the video into the Timeline at the bottom.
  • After that, choose to detach Audio with the right click on theTimeline.
  • The detach option will split the video into Audio and video separately.
  • Now choose the Audio and click on the Delete option.
  • At last, save the edited video, and you are good to go.

Source:- http://setupmenow.com/how-to-remove-audio-from-video-with-vlc-and-imovie/

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. She writes for Norton security products at norton.com/setup.

Safari is a web browser which is used only on Apple devices. Safari is the same as the other web browsers and compatible with incognito mode, multiple tabs and many others. But it is possible that you can face different errors while using the Safari browser. If you want to fix the Safari cannot open the page issue, then follow the steps mentioned in this article.

Here’s how to fix Safari cannot open the page

  • Clear Corrupt Cache
  1. Open the Safari browser on the Mac system.
  2. Press on the Preferences menu.
  3. Once you have gone to the preferences menu, press on the Privacy option.
  4. After that, choose the Manage Website Data option.
  5. Press on the Remove all option for deleting the unwanted data by going to the Safari browser.
  6. Start the Safari browser.
  7. You need to try to access the site once again.
  8. You need to check whether the Safari cannot open the page error.

In case you are using an iPhone, you need to follow the steps mentioned below:

  1. Launch the Settings tab on an iPhone.
  2. Go to the Safari browser.
  3. After that, go to the down till you get the Clear history and website data option.
  4. In case you are getting the User Account Control menu, you need to proceed to the next step.
  5. Start the Safari browser once again.
  6. You have to check whether the Safari cannot open the page error is fixed or not.
  • Change the DNS
  1. Launch the System Preferences tab on the Mac computer.
  2. After that, choose the Network option.
  3. Press on the Advanced option.
  4. Go to the DNS setting tab by pressing on it through the above-mentioned option,
  5. Type the given address 8.8.8.8.
  6. After that, click on the OK button.
  7. Launch the Safari browser once again.
  8. Now, you need to check if the Safari cannot open the page error is fixed or not.
  9. Power cycle the device
  10. Disable the Mac device by shutting down the system properly.
  11. In case you have the workstation of the Mac, keep pressing on the power key for a few seconds.
  12. In case you have a smartphone, try to switch it off.
  13. You need to wait for a few seconds before switching it on.
  14. Launch the Safari browser.
  15. Open the Safari page.
  16. After that, check whether this issue is fixed or not.
  • Check restricted protocol
  1. Launch the settings tab on the smartphone.
  2. After that, press on the General option.
  3. Go down and press on the Restrictions option.
  4. After that, you need to type the password.
  5. Go down till you will get the Allowed content title.
  6. Choose the website’s option, which is given below.
  7. Ensure that All websites option you have already chosen.
  8. You need to save the changes you have done.
  9. Close the All websites menu.
  10. Start the device once again.
  11. After that, you need to check whether this error is successfully fixed.

Source:-  https://medium.com/@davismia9999/how-to-fix-safari-cannot-open-the-page-dcb0f030a59d

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet, utility software and new media. She writes for McAfee products at mcafee.com/activate.

Fallout 4 is very popular because of its stunning gameplay feature. Some users are facing the Fallout 4 long loading error because of the hardware or software problems. In this article, you will get to know the steps to fix Fallout 4 long loading error on your system.

  • Open in Windowed Borderless mode
  1. Open the Steam application.
  2. Press on the Library menu.
  3. Now, you can see all the games.
  4. After that, you need to right-click on the Fallout 4 column.
  5. Press on the Properties option.
  6. After going into the properties menu, go to the General option.
  7. Press on the Set launch options button.
  8. You need to start setting up the open options to “-windowed –noborder.”
  9. Click on the OK button.
  10. You need to press on this option for saving the changes you have done.
  11. Open the Fallout 4 once again after starting the system once again.
  • Remove the FPS Cap
  1. Go to the Graphics settings tab through the Options button.
  2. It is located in the menu list.
  3. After going in the graphics, find the Maximum Frames Per Second option.
  4. Start the game once again.
  5. Now, you need to check whether this issue is fixed or not.
  • Disable Steam Cloud Saves
  1. After that, you will get the game at the left-hand pane.
  2. You need to right-click on the Fallout 4 column.
  3. Press on the Properties options.
  4. After going in the properties menu, press on the Updates option.
  5. After that, unselect the Enable Steam Cloud Synchronization option.
  6. Start saving the changes and close the window.
  7. You need to start the system again.
  8. Open the game.
  9. You need to check if the error is still occurring or not.
  • Disable Vsync
  1. Open the Fallout 4 game.
  2. Press on the Options button.
  3. It is located on the menu list.
  4. After that, press on the Video menu.
  5. After that, choose the Graphics option.
  6. After going in the Graphics, menu clicks on the Vsync option.
  7. Now, you need to disable the Vsync option.
  8. You have to save the changes you have done and close from the Vsync menu.
  9. Start the system once again.
  10. Now, you need to check if the Fallout 4 long loading is fixed or not.
  • Remove the FPS Cap
  1. Go to the Graphics settings tab through the Options button.
  2. It is located in the menu list.
  3. After going in the graphics menu, find the Maximum Frames Per Second option.
  4. Start the system again.
  5. You need to check whether this issue is fixed or not.
  • Disable Steam Cloud Saves
  1. The games will be provided at the left-hand corner of the pane.
  2. You need to right-click on the Fallout 4 column.
  3. Press on the Properties menu.
  4. After going into the properties menu, you need to press on the Updates option.
  5. Unselect the Enable Steam Cloud Synchronization option.
  6. Start saving the changes and close the menu.
  • Edit Fallout 4 preferences
  1. Find the Fallout 4 installation files located in the directory.
  2. After that, find the ini option.
  3. You need to right-click on the ini option.
  4. Launch that option with the Notepad.
  5. Start editing the Notepad.
  6. Start adding the given lines given below the General option.
  7. Start saving the changes you have done.
  8. Close the Notepad menu.
  9. You need to check whether this issue is fixed or not.

Source:- https://mofficecomoffice.com/blog/how-to-fix-fallout-4-long-loading/

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet, utility software and new media. She writes for Microsoft products at office.com/setup.

There are uncountable malware and viruses on the internet which can infect the crap out of your device. You may be able to remove some of these viruses from your device, but some threats are so hard to remove. Your device can even be controlled remotely by these threats. In order to clean your infected computer thoroughly, you have to clean it by installing a new copy of the operating system. When a person installs a new Windows or MacOS in their device, they get a chance to clean the full hard drive. By cleaning up the entire hard drive, malware and other viruses can no longer exist in your computer. It is the one-stop solution for fixing infected devices.

But before cleaning your infected PC, you should copy all important files and data in a removable disk or Pendrive. How to do this all safely? In this article, we are going to talk about just that. So what are you waiting for? Let’s get started. 

How to Clean An Infected Computer?

There are several solutions for removing threats from a computer, some are easy, and some take a bit of time. But all methods include cleaning or scanning the hard drive before transferring files to a removable storage device. In this article, we are going to use a way which might be unique for some users. Once that is done, you will be able to copy files from your device safely. Let’ begin. 

Cleaning Hard Drive Using an Antivirus Boot Disk

Antivirus Boot Disk is an antivirus tool which is used to clean a critical infected computer. It is not an ordinary antivirus that we generally use on our devices. You don’t need to install it on your operating systems in order to use it in your device. It comes pre-installed in a bootable USB flash drive or a DVD. You have to boot Antivirus Boot Disk before Windows loads. It works much like when you install a new Windows and boot the installation drive at startup.

In the same way, you will need to boot this bootable antivirus. This bootable antivirus kills malware when they are not active or deactivated. The malware only activates once your operating system boots up, but it removes all of those viruses in the boot menu. That is why these kind of antivirus are a robust solution against modern malware. 

First, you need to create a bootable antivirus disk in order to clean your infected computer. Also, ensure that you use another safe computer for creating a bootable antivirus drive. Here’s how to create an Antivirus Boot Disk using Bitdefender Rescue CD bootable antivirus:

  1. Download the “Bitdefender Rescue CD’ tool using your favorite browser. 
  2. Also, download the “UNetbootin” tool from the internet. This tool will help us to create a bootable antivirus drive. Ensure that you have to download these both tools in a PC which is not infected. 
  3. Now install the Unetbootin software using the on-screen instructions. Once that is done, you have to launch it.  
  4. Insert the USB drive which you want to use for making bootable antivirus. Please ensure that the USB drive doesn’t have any essential data because it will be all wiped in the process. 
  5. Once the Unetbootin tool appears on the screen, tap the Diskimage option. 
  6. Now from this popup window, navigate to the Bitdefender Rescue ISO file. 
  7. Choose the USB drive which you have plugged. Hit the OK button. 

Let the process complete, and once it is done, you can eject the drive. 

How to Use Bitdefender Rescue to Clean Threats?

  1. First of all, turn off your PC entirely and then insert the antivirus bootable USB drive in your infected device. 
  2. Now turn on the infected device and press the F11 or F12 key to boot the flash drive(boot key is different in every device). 
  3. Now you have to choose the Pendrive that is plugged in using the arrow keys. 
  4. Choose the “Start the Bitdefender Rescue CD in English” option and then hit Enter. 
  5. Do agree to the EULA and then the process of cleaning will start by itself. The antivirus will scan and remove all malware and viruses automatically. Please don’t press any random key during the process. 
  6. Once the scan completes run the scan once more to ensure that your device is now completely safe. Some viruses might remain even after the first scan, that is why the second scan is essential. 
  7. Now turn your computer normally and copy all essential files into a removable disk. Once that is done, you can easily remove the current operating system to clean any remaining threats from your device. Don’t forget to format all drives before installing a new copy of Windows. 

A new Windows installation will not only remove the threats but also makes your device faster and smoother.  

Source:- https://manage-notron.com/how-to-clean-an-infected-computer-and-copy-files-safely/

Mia Davis is a self-professed security expert; she has been making the people aware of the security threats.Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.


Pages: 1 2 »

Sabyasachee Koun Hai ?

Alexa Global Rank 99000

google ranking checker

Website Page View Hit

Sales

Manager